Verified VCS-278 dumps Q&As - 100% Pass from DumpsKing
Pass VCS-278 Exam in First Attempt Guaranteed 2022 Dumps!
Veritas VCS-278 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION 52
An administrator wishes to modify the Override default job priority option for on MS Windows type restore job before the restore job begins.
Where in the Microsoft Windows Backup, Archive, and Restore console can the administrator configure this option?
- A. within file > Specify Net Backup Machines and Policy type
- B. in the Backup, Archive, and Restore window, under the Restore Files tab
- C. after clicking the Restore button, in the Restore Marked Files dialog box
- D. at the bottom of the options listed in File > NetDackup Client Properties > Network
Answer: C
NEW QUESTION 53
Prior to initiating a restore, an administrator realizes that media needed for the restore was written by a server that is unavailable. The administrator does have another server that can perform the restore and that is connected to the same library.
Which two commands can the administrator perform to change the server ownership, so the restore can be performed? (Choose two.)
- A. bpimage
- B. bpimport
- C. bpimagelist
- D. bpmedia
- E. bpimmedia
Answer: A,D
NEW QUESTION 54
A disk pool is a.
- A. None of the above
- B. Logical grouping of media servers
- C. Collection of disk volumes presented as a single entity
- D. Disk enclosure
Answer: C
NEW QUESTION 55
The master server catalog is being recovered to a new server. The administrator receives the message displayed below:
In the NetBackup Administration Console, barcode GBP178S4 is associated with media ID P178S4.
How should the administrator proceed?
- A. delete the tape > set the barcode rule accordingly > re-inventory the library > run recovery
- B. use nbdelete to remove the media id > use vmaddto re-add the media id > re-inventory the library > perform recovery
- C. delete the tape > set the media ID generation rule accordingly > re-inventory the library > run recovery
- D. use bplabelto change the media ID > re-inventory the library > perform recovery
Answer: C
Explanation:
Explanation
NEW QUESTION 56
A backup job is showing the following error message:
Which two actions can an administrator perform to ensure the backup completes successfully? (Choose two.)
- A. increase the Multiplexing value on the Storage Unit.
- B. increase the "Maximum concurrent jobs" parameter on the Storage Unit.
- C. assign a specific Storage Unit for that policy.
- D. ensure at least one storage unit is without the On Demand Only option selected.
- E. increase the "Limit I/O streams" parameter on the disk volume.
Answer: C,D
NEW QUESTION 57
An administrator notices that backups are failing for clients added to a new backup policy. The backups attempt to run again after 10 minutes.
How can the administrator modify the time between backup attempts?
- A. modify the "Job retry delay" host property
- B. modify the "Take checkpoints every" value in the backup policy
- C. modify the "Policy update interval" host property
- D. modify the "Schedule backup attempts" host property
Answer: D
NEW QUESTION 58
An administrator has configured a Storage Lifecycle Policy (SLP) to protect a large number of clients which directs backups to Advanced Disk, then duplicates the images to tape. The administrator is experiencing an SLP backlog, which is causing backups to fail. The current values of key configuration settings are listed below:
Host Properties - Maximum data streams per client = 1 Policy Settings - Maximum jobs per policy = 20 Disk Pool Settings - Maximum I/O streams = 20 Storage Unit Settings - Maximum concurrent jobs = 20 Storage Unit Settings - Multiplexing level = 20 Which parameter should the administrator change to reduce the SLP backlog and allow the backups to complete successfully?
- A. Increase Maximum concurrent jobs for the storage unit
- B. Increase Maximum jobs per policy
- C. Increase Maximum data streams per client
- D. Increase Maximum I/O streams for the disk pool
Answer: B
NEW QUESTION 59
Which two pools are created by default in the NetBackup? (Choose two.)
- A. Scratch pool
- B. CatalogBackup pool
- C. DataStore pool
- D. Deduplication pool
- E. Default pool
Answer: B,C
NEW QUESTION 60
Which command should an administrator use to show a list of incomplete copies of lifecycle managed images?
- A. nbstl
- B. nbstlutil
- C. bpimage
- D. bpimmedia
Answer: B
Explanation:
Explanation/Reference: https://www.veritas.com/content/support/en_US/article.100006475
NEW QUESTION 61
A tape library had the robot firmware upgraded, and now the robot is reading the barcodes with additional characters.
How should an administrator enable NetBackup to use the same characters that were used before the firmware upgrade?
- A. update Media settings
- B. update the Barcode Rules setting
- C. update the device mapping files
- D. update the Media ID Generation setting
Answer: D
NEW QUESTION 62
How can an administrator check deduplication ratios in the NetBackup Administration Console, apart from the Activity Monitor?
- A. Media and Device Management > Devices > Disk Pools
- B. NetBackup Management > Storage > Storage Units
- C. NetBackup Management > Host Properties > Media Servers
- D. Media and Device Management > Credentials > Storage Servers
Answer: D
Explanation:
Explanation
Explanation/Reference: https://www.veritas.com/support/en_US/doc/25074086-127355784-0/v28802759-127355784
NEW QUESTION 63
What should be selected as the source in the BAR console for a restore of individual files backed up using a VMware policy?
- A. The identifier for the VM used in the VMware policy.
- B. The VMware backup host that performed the backup.
- C. The media server that backed the client up.
- D. The hostname of the VM.
Answer: A
NEW QUESTION 64
Which of the following can you not do with Logging Assistant?
- A. Collect logs
- B. Disable debug logging
- C. View log contents
- D. Setup debugging logging
Answer: C
NEW QUESTION 65
Refer to the exhibit.
A backup uses a Full backup schedule with a schedule type of Frequency: 1 days. The start windows for the schedule is configured as shown in the exhibit.
The administrator runs a manual backup at 10:00 on Thursday.
When will the next backup run, if all prior backups completed successfully/
- A. Friday at 10: 00
- B. Friday at 2: 00
- C. Monday at 1:00
- D. Monday at 2:00
Answer: B
NEW QUESTION 66
An image of the volume past is expiration date or has reached its maximum number of mounts is no longer available for restores.
- A. False
- B. True
Answer: A
NEW QUESTION 67
An administrator is preparing to perform disaster recovery for many clients whose backups are stored on multiplexed tapes.
Which host property should the administrator modify, prior to the restores, to ensure the best recovery time?
- A. add the client IP addresses to "Resilient Networks".
- B. increase ''Restore retries".
- C. set "Enable unrestricted media sharing for all media servers".
- D. increase the "MPX_RESTORE_DELAY" setting on the master server.
Answer: B
NEW QUESTION 68
In the NetBackup Administration Console or Java console, how should an administrator change a disk pool to down status?
- A. Media and Device Management > Devices > Disk Pools > right-click and select Down Disk Pool
- B. Device Monitor > Disk Pools > right-click and select Down Disk Pool
- C. Credentials > Storage Servers > right-click and select Down Disk Pool
- D. Devices > Disk Pools > right-click and select Down Disk Pool
Answer: B
NEW QUESTION 69
Refer to the Exhibit.
An administrator is analyzing the NetBackup environment with a view to optimizing backup performance. The environment has been mapped according to the diagram shown below.
What should the maximum possible throughput be for all backup traffic directed to the disk storage unit once the performance analysis and tuning is complete?
- A. 200Mb/s
- B. 90Mb/s
- C. 180Mb/s
- D. 100Mb/s
Answer: D
Explanation:
Explanation
A media server moves data from disk (on relevant clients) to storage (usually disk or tape). The server must be carefully sized to maximize throughput. NetBackup capacity planning 37 Designing your backup system Maximum throughput is attained when the server keeps its tape devices streaming.
NEW QUESTION 70
Backup jobs end with the following series of messages in the Job Details:
Which process is failing to respond?
- A. bpdbm
- B. nbemm
- C. bpbrm
- D. nbjm
Answer: A
NEW QUESTION 71
Refer to the exhibit.
A backup job configured with a retention level of 2 and "Policy volume pool" set to the "server_tapes" is failing due to status code 96: Unable to allocate new media for backup. See the output of the available_media command below:
Which task in the NetBackup Administration Console should the administrator perform to resolve the status code 96 error?
- A. Unfreeze volume E02004 in the "server_tapes" volume pool
- B. Change volume E02002 to the "scratch_pool" volume pool
- C. Change volume E02003 to the "scratch_pool" volume pool
- D. Change volume C11201 to the "scratch_pool" volume pool
Answer: A
NEW QUESTION 72
......
VCS-278 Dumps Full Questions - Exam Study Guide: https://www.dumpsking.com/VCS-278-testking-dumps.html
Use Real VCS-278 - 100% Cover Real Exam Questions: https://drive.google.com/open?id=1D9UKvADGcydK7TrDIyTF1R4Eq3XxEroc
