[Oct 16, 2021] Get Free Updates Up to 365 days On Developing VCS-278 Braindumps
Best Quality Veritas VCS-278 Exam Questions
NEW QUESTION 95
Which command can an administrator run to test and analyze connection between master servers, media servers, and clients for multiple Netbackup ports?
- A. Bpresolver
- B. Bpconfig
- C. Bperror
- D. Bptestnetconn
Answer: D
NEW QUESTION 96
Which type of backup schedule is available when using the "After each backup session schedule type for on NBU Catalog policy type?
- A. Full
- B. Vault catalog Backup
- C. Application Backup
- D. Differential Incremental
Answer: B
NEW QUESTION 97
An administrator needs to recover the NetBackup master server catalog at a disaster recovery site, but the DR files are unavailable.
Which command should the administrator use to recreate the DR file?
- A. cat_import
- B. nbcatsync
- C. bprecover
- D. bpimtport
Answer: D
NEW QUESTION 98
When an administrator creates a duplicate copy of an image, what will the retention be for the new copy?
- A. The backup date plus the new retention period
- B. The specified date plus the retention period.
- C. The duplication date plus the new retention period.
- D. The system date plus the new retention period.
Answer: B
NEW QUESTION 99
Which data is restored if the restore file is a symbolic link?
- A. the link file object and the linked file
- B. the file that the link points to
- C. the link file object
- D. the link file object and the data contained in it
Answer: C
NEW QUESTION 100
An administrator views the following errors from the Detailed Status tab of a failed job in the Activity Monitor.
Which command should the administrator perform to test the communication between the master server and the client based on the output?
- A. nbdb_ping
- B. bptestnetconn -s
- C. bpclntcmd -self
- D. bptestbpcd
Answer: B
NEW QUESTION 101
An administrator needs to recover the NetBackup master server catalog at a disaster recovery site, but the DR files are unavailable.
Which command should the administrator use to recreate the DR file?
- A. cat_import
- B. bprecover
- C. bpimtport
- D. nbcatasync
Answer: C
NEW QUESTION 102
An administrator is preparing to perform disaster recovery for many clients whose backups are stored on multiplexed tapes.
Which host property should the administrator modify, prior to the restores, to ensure the best recovery time?
- A. increase the "MPX_RESTORE_DELAY" setting on the master server.
- B. set "Enable unrestricted media sharing for all media servers".
- C. increase ''Restore retries".
- D. add the client IP addresses to "Resilient Networks".
Answer: C
NEW QUESTION 103
A NetBackup policy is configured to back up the following paths for a client:
Multi-streaming is enabled for the backups, and multiplexing is set to 4. Backup streams are running slowly.
Which step should the administrator consider to improve backup performance?
- A. increase the number of data buffers.
- B. increase the multiplexing level.
- C. disable multistreaming.
- D. back up only one stream from each physical device on the client.
Answer: D
NEW QUESTION 104
An administrator has a master server named master1. When the administer runs the bpclimtcmd -pn command on the client, the administrator receives the following output:
What is a possible cause for his output?
- A. The host file needs to be changed on the master server.
- B. The SAN connection to the master server needs to be configured.
- C. The client has lost connectivity to the master server.
- D. The bp.conf of the client needs to be updated.
Answer: B
NEW QUESTION 105
An administrator configure a default Standard file system backup policy, which up very large file system from a set of clients. There are multiple scheduled backup attempts configured.
How can the administrator the Amount of time needed to complete these backup jobs after failures?
- A. Use the ''Resume Job'' action instead of ''Restart Job''
- B. Increase the ''job retry delay'; host property setting
- C. Increase the ''Client connect timeout'' host property setting
- D. Configure the ''Take checkpoints every policy settings
Answer: D
NEW QUESTION 106
Which two catalog components contain information on what has been backed up and its metadata in NetBackup? (Choose two.)
- A. Class
- B. Volume
- C. Image
- D. NBDB
- E. Media
Answer: C,D
NEW QUESTION 107
From where is the Cleanup Wizard for Instant Recovery launched?
- A. From the NetBackup Administration Console
- B. From the command line on the NetBackup Master Server
- C. From the vSphere Client for Windows
- D. From the NetBackup Plug-in for VMware vSphere Web Client
Answer: D
Explanation:
The graphical Instant Recovery and Instant Recovery Cleanup wizards are found in the NetBackup Plug-in for VMware vSphere Web Client.
NEW QUESTION 108
An administrator is attempting to start NetBackup services on a master server without success. When verifying the database is up using the nbdb_ping command, the administrator receives the following error:
Database [NBDB] is not available
Which log file should the administrator analyze to determine why NetBackup Database fails to start?
- A. emm.log
- B. nbdb.log
- C. nbdbms.log
- D. server.log
Answer: B
NEW QUESTION 109
Prior to initiating a restore, an administrator realizes that media needed for the restore was written by a server that is unavailable. The administrator does have another server that can perform the restore and that is connected to the same library.
Which two commands can the administrator perform to change the server ownership, so the restore can be performed? (Choose two.)
- A. bpimport
- B. bpimagelist
- C. bpimmedia
- D. bpimage
- E. bpmedia
Answer: D,E
NEW QUESTION 110
Refer to the exhibit.
A backup policy uses a Full backup schedule with a schedule type of Frequency: 1 day. The start window for the schedule is configured as shown in the exhibit:
The administrator runs a manual backup at 10:00 on Thursday.
When will the next backup run, if all prior backups completed successfully?
- A. Monday at 2:00
- B. Friday at 2:00
- C. Friday at 10:00
- D. Monday at 1:00
Answer: A
NEW QUESTION 111
From where is the Cleanup Wizard for Instant Recovery launched?
- A. From the NetBackup Administration Console
- B. From the command line on the NetBackup Master Server
- C. From the vSphere Client for Windows
- D. From the NetBackup Plug-in for VMware vSphere Web Client
Answer: D
Explanation:
Explanation/Reference:
Explanation:
The graphical Instant Recovery and Instant Recovery Cleanup wizards are found in the NetBackup Plug-in for VMware vSphere Web Client.
NEW QUESTION 112
Which command starts the NetBackup services on Windows?
- A. The netbackup start command
- B. The start services command
- C. The bpup command
- D. The bp.start_all command
- E. The bpup all command
Answer: C
Explanation:
Explanation
None of the other commands are valid on a Windows NetBackup host, some are valid on UNIX.
NEW QUESTION 113
An administrator is attempting to protect 500TB of Windows file system data in a 4-hour backup window, when the file servers are idle. The daily change rate for the data is below 1%, and an Initial full backup has been performed to a high performance disk array configured as an Advanced Disk storage unit.
What can the administrator do to ensure subsequent backups complete within the backup window?
- A. configure client-side deduplication
- B. configure multiplexing
- C. configure Synthetic backups
- D. configure NetBackup Accelerator
Answer: C
NEW QUESTION 114
Refer to the exhibit.
A backup policy uses a Full Backup schedule with a schedule type of Frequency: 1 days. The start window for the schedule is configured as shown in the exhibit:
The administrator runs a manual backup at 10:00 on Thursday.
When would the next backup run, if all prior backups completed successfully?
- A. Friday at 2:00
- B. Monday at 10:00
- C. Monday at 2:00
- D. Friday at 10:00
Answer: A
NEW QUESTION 115
Prior to initiating a restore , an administrator realize that media needed for the restore was written By a server that is unavailable. The administrator does have another server that can performs that restore and that is connected to the same library.
Which two commands can the administrator performs to change the server over ship, so the restore can be performed?
- A. Bpimmedis
- B. Bpmedia
- C. Bpimage list
- D. bpimport
- E. Bpimage
Answer: D,E
NEW QUESTION 116
An administrator performing a backup and receives the following error message:
129 Message: Disk storage unit is full.
Which NetBackup command should the administrator use to report the potential space of advancedDisk storage units?
- A. Nbdevquery
- B. Nbdiscover
- C. bpdbclm
- D. Nbemmcmd
Answer: A
NEW QUESTION 117
During a catalog backup, the NBDB and configuration files are backed up directly to the storage unit.
- A. False
- B. True
Answer: A
Explanation:
During a catalog backup, the configuration files are backed up directly to the storage unit, however a copy of the NBDB is first place in a staging location on the master server prior to being backed up.
NEW QUESTION 118
Where in the Backup, Archive, and Restore interface on a Microsoft Windows Client would an administrator define the source client for a restore job?
- A. Select for Restore > Restore from Normal Backup
- B. File > NetBackup Client Properties > General
- C. File > NetBackup Client Properties > Host Properties
- D. File > Specify NetBackup Machines and Policy Type
Answer: A
NEW QUESTION 119
An administrator wants deduplication clients in a remote office to perform backup so less data is sent Over the wide area network (WAN). Which action should the administrator perform to reduce the total amount of data sent over the WAN?
- A. Set the deduplication disk pool to ''Limit I/O streams''
- B. Enable deduplication stream handlers for the clients
- C. Set client attributes to ''Always use the media server''
- D. Set client attributes to ''Always use client-side deduplication''
Answer: D
NEW QUESTION 120
......
Veritas Exam Practice Test To Gain Brilliante Result: https://www.dumpsking.com/VCS-278-testking-dumps.html
Tested Material Used To VCS-278: https://drive.google.com/open?id=1D9UKvADGcydK7TrDIyTF1R4Eq3XxEroc
