Get New 2023 HP exam HPE6-A73 Dumps Bundle On flat Updated Dumps!
Full HPE6-A73 Practice Test and 124 unique questions with explanations waiting just for you, get it now!
NEW QUESTION 60
Examine the following AOS-CX configuration:
Based on this configuration, which statement is correct regarding IoT traffic?
- A. All routes are ignored in the routing table for IoT traffic, which is routed to 10.100.1.2
- B. If a specific route is not available in the routing table, the traffic will be routed to 10.100.1.2
- C. The next hop of 10.100.1.2 can be one or more hops away from the AOS-CX switch
- D. If 10.100.1.2 is not reachable, the IoT traffic will be automatically dropped by the switch
Answer: B
NEW QUESTION 61
A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of
"Unknown".
What is the cause of this issue?
- A. A connectivity issue exists between NAE and the AOS-CX switch
- B. The administrator does not have the appropriate credentials to interact with NAE
- C. The RESTful API has not been enabled on the AOS-CX switch
- D. The number of scripts or agents has exceeded the hardware's capabilities
Answer: A
NEW QUESTION 62
What would prevent two OSPF routers from forming an adjacency? (Select two.)
- A. Different router IDs
- B. Different area types
- C. Different MTU sizes
- D. Different IP addresses
- E. Different priorities
Answer: B,C
NEW QUESTION 63
What is correct regarding the operation of VSX and multicasting with PIM-SM routing configured?
- A. Each VSX peers runs PIM and builds its own group database Both VSX peers can forward multicast streams to receivers in a VLAN achieving load sharing.
- B. Each VSX peers runs PIM and builds its own group database One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
- C. Each VSX peers runs PIM and creates a shared group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN.
- D. Each VSX peers runs PIM and creates a shared group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing.
Answer: C
NEW QUESTION 64
Examine the commands entered on an AOS-CX switch:
What is true regarding this configuration for traffic received on interface 100?
- A. The traffic is always dropped if the next-hop addresses are unreachable.
- B. The traffic will be routed with the IP routing table entries if the next-hop addresses are unreachable.
- C. The default next-hop address supersedes the two preceding next-hop addresses.
- D. The next-hop address of 1.1.1.1 is overwritten by the next-hop address of 2.2.2.2.
Answer: C
NEW QUESTION 65
A company has a third-party AAA server solution. The campus access layer was just upgraded to AOS-CX switches that perform access control with MAC-Auth and 802.1X. The company has an Aruba Mobility Controller (MC) solution for wireless, and they want to leverage the firewall policies on the controllers for the wired traffic.
What is correct about how the company should implement a security solution where the wired traffic is processed by the MCs?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Implement standards-based RADIUS VSAs to pass policy information directly to the AOS-CX switches and MCs
- B. Implement local user roles with a gateway role defined on the AOS-CX switches
- C. Implement downloadable user roles with a device role defined on the AOS-CX switches and MCs
- D. Implement downloadable user roles with a gateway role defined on the AOS-CX switches
Answer: C
NEW QUESTION 66
The AOS-CX mobile app allows a network engineer or technician to perform which tasks? (Choose two.)
- A. Transfer files between the switch and your mobile device.
- B. Create a stack of AOS-CX switches.
- C. Securely access the switch using SSH.
- D. Use NetEdit to manage switch configuration.
- E. Schedule an operating system upgrade.
Answer: A,B
Explanation:
ACSP Study Guide Page 66 - Key Features (Transfer files between the switch and your mobile device)
NEW QUESTION 67
The company has just upgraded their access layer switches with AOS-CX switches and implemented an AAA solution with ClearPass. The company has become concerned about what actually connects to the user ports on the access layer switch, Therefore, the company is implementing 802.1X authentication on the AOS-CX switches. An administrator has globally enabled 802.1X, and has enabled it on all the access ports connected to user devices, including VoIP phones, security cameras, and wireless Aruba IAPs. Wireless users are complaining that they successfully authenticate to the IAPs; however, they do not have access to network resources. Previously, this worked before 802.1X was implemented on the AOS-CX switches.
What should the company do to solve this problem?
- A. Implement device-based mode on the lAP-connected AOS-CX switch ports.
- B. Implement AAA RADIUS change of authorization on the AOS-CX switches.
- C. Implement local user roles and local forwarding on the AOS-CX switches.
- D. Implement downloadable user roles and user-based tunneling (UBT) on the AOS-CX switches.
Answer: D
NEW QUESTION 68
A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized. What should be done to fix this issue?
- A. Ensure NetEdit and the AOS-CX switch are synchronized to the same NTP server.
- B. Ensure the engineers PC is synchronized to the same NTP server as the AOS-CX switch
- C. Ensure the engineers web browser is configured for the same timezone as the AOS-CX switch
- D. Enable trust settings for the AOS-CX switch's SSL certificate
Answer: B
NEW QUESTION 69
Examine the following AOS-CX configuration:
Based on this configuration, which statement is correct regarding loT traffic'?
- A. All routes are ignored in the routing table for loT traffic, which is routed to 10 100 1 2.
- B. If 10.100.1.2 is not reachable the loT traffic will be automatically dropped by the switch
- C. The next hop of 10 100 1.2 can be one or more hops away from the AOS-CX switch.
- D. If a specific route is not available in the routing table the traffic will be routed to 10 100 1.2
Answer: B
NEW QUESTION 70
A network administrator is attempting to troubleshoot a connectivity issue between a group of users and a particular server. The administrator needs to examine the packets over a period of time from their desktop; however, the administrator is not directly connected to the AOS-CX switch involved with the traffic flow.
What is correct regarding the ERSPAN session that needs to be established on an AOS-CX switch?
(Choosetwo.)
- A. The encapsulation protocol used is VXLAN
- B. On the source AOS-CX switch, the destination specified is the switch to which the administrator's desktop is connected
- C. The encapsulation protocol is UDP
- D. On the source AOS-CX switch, the destination specified is the administrator's desktop
- E. The encapsulation protocol used is GRE
Answer: D,E
NEW QUESTION 71
Examine the network topology.
Based on the above information, what is correct?
- A. Area 1 has 23 routes
- B. Area 0 has 13 routes.
- C. Corel has received one LSA Type 5 from the ASBR
- D. Corel has no OSPF routes.
Answer: B
NEW QUESTION 72
Examine the following AOS-CX switch configuration:
Which statement correctly describes what is allowed for traffic entering interface 1/1/3?
- A. Traffic from 10.0.12.0/24 will generate a log record when accessing 10.0.11.0/24
- B. IP traffic from 10.0.11.0/24 is allowed to access 10.1.12.0/24
- C. IP traffic from 10.1.11.0/24 is allowed to access 10.1.110.0/24
- D. IP traffic from 10.1.12.0/24 is allowed to access 172.0.1.0/23
Answer: A
NEW QUESTION 73
A customer has twenty AOS-CX switches that will be managed by NetEdit and would like support for NetEdit these switches will exist in the network for at least five years.
Which type of licensing should be used by this customer?
- A. 20 Aruba NetEdit permanent licenses
- B. 20 Aruba NetEdit single node subscription licenses
- C. 1 Aruba NetEdit SMB License
- D. 25 Aruba NetEdit permanent licenses
Answer: B
NEW QUESTION 74
Which statement is correct regarding ACLs and TCAM usage?
- A. Using object groups consumes the same resources as specific ACE entries.
- B. Applying an ACL to a group of VLANs consumes the same resources as specific ACE entries
- C. Applying an ACL to a group of ports consumes the same resources as specific ACE entries
- D. Compression is automatically enabled for ASIC TCAMs on AOS-CX switches.
Answer: C
NEW QUESTION 75
An administrator will be implementing tunneling between AOS-CX switches and Aruba gateways. Which list of protocols must minimally be allowed by an intermediate firewall between two sets of devices?
- A. UDP 8211 and IP protocol 47
- B. IP protocol 50 and UDP 8209
- C. UDP 4500 and UDP 8209
- D. UDP 4500 and IP protocol 47
Answer: D
NEW QUESTION 76
A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8.4 code.
The solution leverages a third-party AAA solution. The company is replacing existing access switches withAOS-CX 6300 and 6400 switches. The company wants to leverage the same security and firewall policies forboth wired and wireless traffic.
Which solution should the company implement?
- A. User-based tunneling
- B. Downloadable user roles
- C. RADIUS dynamic authorization
- D. IPSec
Answer: C
NEW QUESTION 77
An administrator has configured the following on an AOS-CX switch:
What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?
- A. access-list ip server 10 permit tcp any group web-servers group web-ports
- B. access-list ip server 10 permit tcp any web-servers web-ports
- C. access-list ip server 10 permit tcp any web-servers group web-ports
- D. access-list ip server 10 permit tcp any object-group web-servers object-group web-ports
Answer: B
NEW QUESTION 78
An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as primary and secondary. The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.
What would cause this problem?
- A. LACP was enabled in active mode on the VSX LAG
- B. The VSX LAG interfaces are in layer-3 mode
- C. Local optimization was not enabled on the VSX LAG
- D. The VSX LAG hash does not match the remote peer
Answer: D
NEW QUESTION 79
What is a concept associated with PIM sparse mode (SM)?
- A. Implements a push content to forward traffic from the multicast source.
- B. Reverts to forwarding when the pruning state times out.
- C. Requires periodic joins to maintain the shortest path tree (SPT).
- D. Recommended for use when high bandwidth connections exist.
Answer: D
NEW QUESTION 80
......
[Jan-2023] Pass HP HPE6-A73 Exam in First Attempt Guaranteed: https://drive.google.com/open?id=1lynvOP7hIzHIkPFqE4ZFKRbFQu74Eaxm
Reduce Your Chance of Failure in HPE6-A73 Exam: https://www.dumpsking.com/HPE6-A73-testking-dumps.html
