Free HPE6-A73 Braindumps Download Updated on Jun 28, 2022 with 102 Questions
HP HPE6-A73 Exam Practice Test Questions
For more info visit
Configuring Hewlett Packard Enterprise GreenLake Solutions HP Reference
Salary of Configuring Hewlett Packard Enterprise GreenLake Solutions HP avowed topic specialists
Organization designers can procure around $110,000 or significantly more when utilized full-time. A task with Aruba Networks could even procure you a normal of $148,000 as an organization engineer, as indicated by Paysa. In the event that you need to acquire what you need as an organization engineer, the most ideal alternative is regularly to decide to independent. Functioning as an independent organization engineer, you can pick the work that you do.
Field Engineer simplifies it to look for some kind of employment and begin acquiring. The stage allows you to join in minutes, and you can before long secure the positions that are ideal for you. The worldwide commercial center allows you to look progressively to track down the most state-of-the-art occupations that are ideal for you.
NEW QUESTION 20
An administrator implements interim accounting for guest users so that ClearPass can track the amount of bandwidth that guests upload and download. Guests that abuse bandwidth consumption should be disconnected from the network. The administrator configures the following on the AOS-CX access switches:
After performing this configuration, the administrator notices that guest users that have exceeded the guest bandwidth limit are not being disconnected. Upon further investigation, Access Tracker in ClearPass indicates a disconnect CoA message is being sent to the AOS-CX switch.
What is causing this issue?
- A. There is a time discrepancy between the AOS-CX switch and ClearPass.
- B. Bandwidth consumption of the guests is not being reported by the AOS-CX switch.
- C. NTP is not configured on the AOS-CX switch.
- D. RADIUS change of authorization is not enabled on the AOS-CX switch.
Answer: D
NEW QUESTION 21
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Area 1 has 23 routes
- B. Core1 has received one LSA Type 5 from the ASBR
- C. Area 0 has 13 routes
- D. Core1 has no OSPF routes
Answer: A
NEW QUESTION 22
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. Policy-based routing (PBR)
- B. OSPF route maps using the "set metric" command
- C. User-based tunneling (UBT)
- D. Classifier policies
Answer: A
NEW QUESTION 23
How js voice traffic prioritized correctly on AOS-CX switches'?
- A. By implementing voice VLANs
- B. By defining device profiles with QOS settings
- C. By placing tt in the strict priority queue
- D. By implementing weighted fair queueing (WFQ)
Answer: A
NEW QUESTION 24
Examine the network topology.
Company XYZ has two connections to a service provider (ISP1). Here is the configuration of Router1:
Here is the configuration of Router2:
Based on configuration of Router1 and Router2, which BGP metric is being manipulated?
- A. AS path length
- B. Weight
- C. Multiple exit discriminator
- D. Local preference
Answer: C
NEW QUESTION 25
Examine the following AOS-CX configuration:
Based on this configuration, which statement is correct regarding loT traffic'?
- A. The next hop of 10 100 1.2 can be one or more hops away from the AOS-CX switch.
- B. All routes are ignored in the routing table for loT traffic, which is routed to 10 100 1 2.
- C. If 10.100.1.2 is not reachable the loT traffic will be automatically dropped by the switch
- D. If a specific route is not available in the routing table the traffic will be routed to 10 100 1.2
Answer: C
NEW QUESTION 26
Examine the configuration performed on newly deployed AOS-CX switches:
After performing this configuration, the administrator notices that the switch ports always remain in the EAP start state. What should the administrator do to fix this problem?
- A. Define the server group cppm
- B. Create and assign a local user role to the ports
- C. Enable change of authorization (CoA)
- D. Set the ports to client-mode
Answer: C
NEW QUESTION 27
A network administrator wants to centralize the management of AOS-CX switches by implementing NetEdit.
How should the administrator purchase and/or install the NetEdit solution?
- A. Installed on a supported version of RedHat Enterprise Linux
- B. Install as a hardware appliance
- C. Installed on a supported version of Debian Linux
- D. Installed in a virtualized solution by using the Aruba-supplied OVA file
Answer: D
NEW QUESTION 28
Examine the following AOS-CX switch configuration:
Which access control entries would allow web traffic to the web servers 10.1.0.100 and 10.1.1.100?
- A. permit tcp any 10.1.0.100 0.0.1.0 eq 80
- B. permit tcp servers eq 80
- C. permit tcp any 10.1.0.100/10.1.1.100 eq 80
- D. permit tcp any 10.1.0.100/255.255.254.255 eq 80
Answer: A
NEW QUESTION 29
An administrator wants to leverage always-on PoE on AOS-CX switches. Which statement is correct regarding this feature'?
- A. Provides up to 60W of power per port
- B. Provides surge protection for PoE and non-PoE ports
- C. Requires NetEdit to implement
- D. Supports all AOS-CX switches
Answer: A
NEW QUESTION 30
A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA. Each switch has the two servers defined. A network engineer notices the following command configured on the AOS-CX switches:
radius-server tracking user-name monitor password plaintext aruba123
What is the purpose of this configuration?
- A. Define the account to implement change of authorization
- B. Speed up the AAA authentication process
- C. Define the account to implement downloadable user roles
- D. Implement replay protection for AAA messages
Answer: A
Explanation:
Explanation
https://techhub.hpe.com/eginfolib/networking/docs/switches/K-KA-KB/16-01/5200-
0122_access_security_guide/content/ch09s02.html
NEW QUESTION 31
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Area 1 has 23 routes
- B. Core1 has received one LSA Type 5 from the ASBR
- C. Area 0 has 13 routes
- D. Core1 has no OSPF routes
Answer: A
NEW QUESTION 32
Examine the attached exhibit.
The network administrators is trying to add a remote location as area 3 to the network shown in the diagram.
Based on current connection restrictions, the administrator cannot connect area 3 directly to area 0. The network is using AOS-CX switches.
Which feature should the administrator implement to provide connectivity to the remote location?
- A. Not-so-stubby areas
- B. OSPFv3
- C. Bidirectional forward detection (BFD)
- D. Virtual links
Answer: D
NEW QUESTION 33
An administrator in a company of 349 users has a pair of AOS-CX switches with connections to external networks. Both switches are configured for OSPF. The administrator wants to import external routes on both switches, but assigns different seed metrics to the routes, as well as imports them as external type-1 routes.
What is the best way for the administrator to accomplish this?
- A. Create a route map with the correct route type and metrics
- B. Define a class and policy map with the correct route type and metrics
- C. Create a classifier policy with the correct route type and metrics
- D. Define the route type and metrics in the OSPF process
Answer: A
NEW QUESTION 34
A network engineer for a company with 896 users across a multi-building campus wants to gather statistics on an important switch uplink and create actions based on issues that occur on the uplink. How often does an NAE agent gather information from the current state database in regard to the uplink interfaces?
- A. Once every 30 seconds
- B. Once every 60 seconds
- C. Once every 5 seconds
- D. Once every 1 second
Answer: B
NEW QUESTION 35
Examine the following ACL rule policies:
* Permit traffic from 10.2.2.1 through 10.2.2.30 to anywhere
* Permit traffic from 10 2.2 40 through 10 2 2 55 to anywhere
* Deny all others
Based on this policy, place the following ACL rule statements in the correct order to accomplish the above filtering policy.
- A. permit ip 10 2 2 40 255 255 255 248 any
permit ip 10 2.2 48 255 255 255.248 any
permit ip 10 2.2 0 255 255.255.192 any
deny ip 10.2.2.31 255.255.255.255 any
deny ip 10 2 2 32 255 255 255 224 any - B. deny ip 10 2 2.31 255 255.255.255 any
permit ip 10,2.2 40 255 255 255.248 any
permit ip 10.2.2.48 255.255.255.248 any
deny ip 10 2 2.32 255 255 255 224 any
permit ip 10.2.2.0 255.255.255.192 any - C. denv ip 10 2 2.31 255 255.255.255 any
deny ip 10 2.2.32 255 255.255.224 any
permit ip 10 2 2 40 255 255 255 248 any
permit ip 10.2.2 48 255 255 255.248 any
permit ip 10 2.2 0 255 255 255.192 any - D. deny ip 10 ,2.2.31 255.255.255.255 any
permit ip 10 2 2 40 255 255 255 248 any
deny ip 10 2.2.32 255 255.255.224 any
permit ip 10 2 2 48 255 255 255.248 any
permit tp 10.2.2.0 255.255.255.192 any
Answer: B
NEW QUESTION 36
Examine the attached diagram.
The two PCs are located in VLAN 11 (10.1.11.0/24). Which example defines how to implement active gateway on the VSX core for VLAN 11?
- A. vsx
vrrp group 1 - B. interface lag 254
active-gateway vlan 11 ip 10.1.11.1
active-gateway vlan 11 mac 02:02:00:00:01:00 - C. interface vlan 11
active-gateway ip 10.1.11.1
active-gateway mac 02:02:00:00:01:00 - D. interface lag 254
active-gateway ip 10.1.11.1
active-gateway mac 02:02:00:00:01:00
Answer: C
NEW QUESTION 37
Which protocols are used by NetEdit to interact with third-party devices? (Choose two.)
- A. SSH
- B. SNMP
- C. telnet
- D. CDP
- E. Restful API
Answer: A,B
NEW QUESTION 38
When implementing deficit weighted round robin queuing, what importance does the weight value have?
- A. Strict priority queue
- B. Queue priority in processing traffic
- C. Percentage of interface bandwidth
- D. Prioritizing latency-sensitive traffic
Answer: B
NEW QUESTION 39
A network administrator is implementing OSPF, where there are two exit points. Each exit point has a stateful, application inspection firewall to implement company policies.
What would the best practice be to ensure that one firewall will see both directions of the traffic, preventing asynchronous connections in the network?
- A. Both ASBRs should define External Type 2 routes for the
- B. Both ASBRs should define External Type 1 routes for the
- C. Both ASBRs should define External Type 2 routes for the
- D. Both ASBRs should define External Type 1 routes for the
Answer: B
NEW QUESTION 40
A network administrator is attempting to troubleshoot a connectivity issue between a group of users and a particular server. The administrator needs to examine the packets over a period of time from their desktop; however, the administrator is not directly connected to the AOS-CX switch involved with the traffic flow.
What is correct regarding the ERSPAN session that needs to be established on an AOS-CX switch? (Choose two.)
- A. On the source AOS-CX switch, the destination specified is the switch to which the administrator's desktop is connected
- B. On the source AOS-CX switch, the destination specified is the administrator's desktop
- C. The encapsulation protocol used is VXLAN
- D. The encapsulation protocol is UDP
- E. The encapsulation protocol used is GRE
Answer: A,E
NEW QUESTION 41
What is correct regarding policy-based routing?
- A. Policies can only be applied to routed interfaces.
- B. Monitoring of policy interfaces occurs every 60 seconds.
- C. Policies can be applied inbound and outbound.
- D. Policy actions include routing permitting or dropping traffic.
Answer: A
NEW QUESTION 42
......
Updated Verified HPE6-A73 dumps Q&As - Pass Guarantee or Full Refund: https://www.dumpsking.com/HPE6-A73-testking-dumps.html
Updated Certification Exam HPE6-A73 Dumps - Practice Test Questions: https://drive.google.com/open?id=1GlosXMJCXnNdFMNFTDUDoqS6lpzb3RDh
