Pass NS0-303 Exam in First Attempt Guaranteed 2021 Dumps!
NS0-303 Dumps Full Questions - Exam Study Guide
NEW QUESTION 35
You need to back up some of your daily Snapshot copies from ONTAP Select to Cloud Volumes ONTAP. You need to back up application-consistent Snapshot copies that are created four times daily. You also have several crash-consistent Snapshot copies that you do not want to back up to the cloud that are currently replicating.
To satisfy this requirement, which Snapshot policy parameter do you need to set on the application-consistent Snapshot copies?
- A. prefix
- B. label
- C. count
- D. schedule
Answer: D
NEW QUESTION 36
You have an AFF A800 system with a 100 TB volume. You are using all default settings and have 4:1 storage efficiency. You are asked to replicate to a Cloud Volumes ONTAP instance for disaster recovery. The destination volume has post-process compression disabled and is set up with the MirrorAllSnapshots policy.
In this scenario, how many terabytes will be used on the Cloud Volumes ONTAP destination?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 37
Your customer has an E-Series and wants to bock up the volumes to the cloud.
Which two components are required to accomplish this task using SANtricity Cloud Connector? (Choose two.)
- A. Red Hat or SUSE Enterprise Linux Server as a backup host
- B. Cloud Connector License key for SANtricity
- C. AWS S3 bucket
- D. Windows 2016 Datacenter Edition as a backup host
Answer: B,C
NEW QUESTION 38
You want to set up Cloud Sync between your on-premises ONTAP node and your AWS Cloud Volumes Service NFS mount.
In this scenario, which two network components would you use? (Choose two.)
- A. Express Route
- B. VPN
- C. VPC endpoint
- D. Direct Connect
Answer: A
NEW QUESTION 39
You are creating a Cloud Volumes Service volume In Google Cloud Platform (GCP) that serves multiprotocol SMB and NFS.
In this scenario, which two directory services are supported? (Choose two.)
- A. Windows Workgroup Authentication
- B. Linux Samba Active Directory in the tenant Virtual Private Cloud (VPC)
- C. Windows 2008r2 or later Active Directory server in the tenant Virtual Private Cloud (VPC)
- D. third-party Active Directory as a Service in GCP
Answer: B,C
NEW QUESTION 40
You created a volume with Cloud Volumes Service for AWS for an analytics application. The application using the volume requires maximum performance. You have set the service level to "extreme". All the analysis takes place between 9:00 A.m. and 5:00 p.m.
In this scenario, how would you optimize storage cost?
- A. Use the built-in sync service to move the volume to another region with lower cost storage.
- B. Reduce the capacity of the volume.
- C. Create a new volume with a lower service level.
- D. Use the API to lower the service level of the volume during off-peak hours.
Answer: D
NEW QUESTION 41
Click the Exhibit button.
You have set the Snapshot policy shown in the exhibit on your Cloud Volumes Service for AWS.
On the 30th of the month at 10:00 p.m., how many Snapshot copies do you have?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 42
Click the Exhibit button.
You are deploying Cloud Volumes ONTAP in HA mode for AWS. You are using the standard license that has a capacity limit of 10 TB.
Referring to the exhibit, how much more capacity would satisfy the maximum license limit?
- A. 2 TB of storage on each node
- B. 8 TB of storage on each node
- C. 6 TB of storage for the HA pair
- D. 2 TB of storage for the HA pair
Answer: D
NEW QUESTION 43
Your customer is using Google Cloud Interconnect to access a StorageGRID S3 bucket from applications running in Google Cloud Platform (GCP). From the private cloud router, the customer can ping any instances behind the GCP Virtual Private Cloud (VPC), but the return traffic is not routed correctly. The private cloud gateway has been defined correctly within GCP.
In this scenario, which network setting should be Investigated to help your customer solve the issue?
- A. the Border Gateway Protocol (BGP) parameters on the private cloud routers
- B. the CIDR blocks configured on the Cloud Interconnect
- C. the VLAN configuration on the private cloud switches
- D. the maximum transfer unit (MTU) settings on the private cloud routers
Answer: B
NEW QUESTION 44
You have designed and written applications as containers and want to deploy them on a Kubernetes cluster. You want to use Cloud Volumes ONTAP to provide dynamic persistent storage for your Kubernetes cluster.
In this scenario, what will automate this task?
- A. Trident
- B. kubectl
- C. Terraform
- D. Istio
Answer: A
NEW QUESTION 45
You need to set permissions to launch OnCommand Cloud Manager in AWS public cloud without using Cloud Central.
In this scenario, to ensure that OnCommand Cloud Manager can launch successfully, which action would accomplish this task?
- A. Grant permissions to the OnCommand Cloud Manager instance.
- B. Open a firewall rule for port 443 to my.netapp.com.
- C. Grant permissions to the IAM User.
- D. Grant permissions to the account Admin User.
Answer: C
NEW QUESTION 46
Your company has purchased a NetApp HCI. You are asked to deploy HA file services out of the NetApp HCI system.
Which two actions accomplish this task? (Choose two.)
- A. Provide an ONTAP Select license file.
- B. Provide an ONTAP cluster base license key.
- C. Use ONTAP Select Deploy.
- D. Select "Yes, I want to enable File Services" on the NetApp Deployment Engine.
Answer: A,C
NEW QUESTION 47
You are asked to migrate data from Amazon Web Services (AWS) to Azure using Cloud Sync. In this scenario, what is necessary to synchronize between the source and the target?
- A. AWS Data Sync
- B. Data Broker
- C. Transit Gateway
- D. Mediator
Answer: C
NEW QUESTION 48
Which two advanced SMB features are available with Cloud Volumes ONTAP 9.5? (Choose two.)
- A. multichannel
- B. workgroup authentication
- C. credit limits
- D. large MTU
Answer: A,D
NEW QUESTION 49
Your company has purchased a new NetApp HCI cluster that you would like to backup to a Cloud Volumes ONTAP Instance.
In this scenario, which protocol would you use to natively back up all the LUNs on the cluster?
- A. NFS
- B. Swift
- C. S3
- D. SnapMirror
Answer: D
NEW QUESTION 50
You have a cloud-connected storage system that is located in a collocation facility that uses AWS Direct Connect. The AWS Direct Connect circuit is already configured and you want to verify that your compute nodes in AWS are able to connect to the volumes created on the storage. You want to verify connectivity using the NFS protocol.
In this scenario, what are three solutions? (Choose three.)
- A. Use OnCommand Systems Manager to test NFS connectivity
- B. Connect a remote desktop session to the export.
- C. Create a NFS export and use the AWS VM Instance to mount the export.
- D. Write a text file and save it to the NFS export.
- E. Launch an AWS VM instance running Linux in the VPC that is connected to the AWS Direct Connect network.
Answer: A,C,E
NEW QUESTION 51
Why would you want to schedule the shut down and restart of Cloud Volumes ONTAP?
- A. to lower compute costs
- B. to earn Azure credits
- C. to lower capacity costs
- D. to Increase the throughput
Answer: A
NEW QUESTION 52
You are setting up your first sync relationship In Cloud Sync. You must add a NetApp data broker. You are using a CIFS server as your source location.
In this scenario, what are three supported target locations? (Choose three.)
- A. Amazon EBS
- B. StorageGRID
- C. S3 bucket
- D. Azure managed disks
- E. Blob container
Answer: B,C,E
NEW QUESTION 53
When you export an NFS share to an AWS EC2 instance using OnCommand Cloud Manager, which two steps in the process would it automate? (Choose two.)
- A. mapping the LUN to the appropriate igroup
- B. creating the LUN In the volume
- C. exporting the volume/share to the EC2 Instance
- D. creating the volume
Answer: C
NEW QUESTION 54
You are the administrator for your company's Azure Infrastructure. You need to create a custom role to ensure that you can deploy Cloud Volumes ONTAP without using NetApp Cloud Central.
Which modification do you need to make to the JSON file to accomplish this task?
- A. Modify the Azure VM ID.
- B. Add the Azure GUID.
- C. Add the Azure Subscription ID.
- D. Modify the Azure IAM policy.
Answer: C
NEW QUESTION 55
Your company has multiple AWS accounts. Including AWS child accounts. Your company wants to use Cloud Insights to monitor the accounts.
According to NetApp documentation, what is the recommended deployment method in this scenario?
- A. Deploy one acquisition unit and one data collector.
- B. Deploy one acquisition unit and one data collector per child account.
- C. Deploy one acquisition unit and multiple data collectors.
- D. Deploy multiple acquisition units and one data collector.
Answer: D
NEW QUESTION 56
You are trying to deploy an OnCommand Cloud Manager from the marketplace to your Azure resource group, but the deployment fails.
In this situation, what caused this problem?
- A. A custom role with the proper permissions has not been created.
- B. A subnet in your Azure resource group is not connected to your local company network.
- C. An express route between your local network and Azure has a firewall rule that is set to deny.
- D. A virtual machine in your Azure resource group on which to deploy Cloud Manager has not been created.
Answer: A,C
NEW QUESTION 57
......
NetApp Certified Free Certification Exam Material from DumpsKing with 88 Questions: https://www.dumpsking.com/NS0-303-testking-dumps.html
Use Real NS0-303 - 100% Cover Real Exam Questions: https://drive.google.com/open?id=17i0Os5lC5SgTaeTZjVqPRqelHoWk8mUq
