[Oct 22, 2021] Updates Up to 365 days On Valid 300-715 Braindumps
Best Quality300-715 Exam Questions Cisco Test To Gain Brilliante Result
NEW QUESTION 21
What is the Cisco ISE default admin login name and password?
- A. admin/no default password--the admin password is configured at setup
- B. admin/admin
- C. admin/cisco
- D. ISEAdmin/admin
Answer: A
NEW QUESTION 22
What sends the redirect ACL that is configured in the authorization profile back to the Cisco WLC?
- A. Cisco-av-pair
- B. State attribute
- C. Event
- D. Class attribute
Answer: A
Explanation:
Section: Profiler
Explanation/Reference: https://community.cisco.com/t5/network-access-control/ise-airespace-acl-wlc-problem/td- p/2110491
NEW QUESTION 23
An organization is implementing Cisco ISE posture services and must ensure that a host-based firewall is in place on every Windows and Mac computer that attempts to access the network They have multiple vendors' firewall applications for their devices, so the engineers creating the policies are unable to use a specific application check in order to validate the posture for this What should be done to enable this type of posture check?
- A. Use the file registry condition to ensure that the firewal is installed and running appropriately.
- B. Use a compound condition to look for the Windows or Mac native firewall applications.
- C. Enable the default rewall condition to check for any vendor rewall application.
- D. Enable the default application condition to identify the applications installed and validade the rewall app.
Answer: C
Explanation:
https://www.youtube.com/watch?v=6Kj8P8Hn7dY&t=109s&ab_channel=CiscoISE-IdentityServicesEngine
NEW QUESTION 24
Which two endpoint compliance statuses are possible? (Choose two.)
- A. unknown
- B. compliant
- C. valid
- D. invalid
- E. known
Answer: A,B
Explanation:
Section: Endpoint Compliance
NEW QUESTION 25
Refer to the exhibit:
Which command is typed within the CLI of a switch to view the troubleshooting output?
- A. show authentication registrations
- B. show authentication sessions method
- C. show authentication sessions mac 000e.84af.59af details
- D. show authentication interface gigabitethemet2/0/36
Answer: C
NEW QUESTION 26
A network security engineer needs to configure 802.1X port authentication to allow a single host to be authenticated for data and another single host to be authenticated for voice. Which command should the engineer run on the interface to accomplish this goal?
- A. authentication host-mode multi-auth
- B. authentication host-mode single-host
- C. authentication host-mode multi-domain
- D. authentication host-mode multi-host
Answer: C
NEW QUESTION 27
An engineer is designing a new distributed deployment for Cisco ISE in the network and is considering failover options for the admin nodes. There is a need to ensure that an admin node is available for configuration of policies at all times. What is the requirement to enable this feature?
- A. one policy services node and one monitoring and troubleshooting node
- B. one primary admin node and one monitoring and troubleshooting node
- C. one policy services node and one secondary admin node
- D. one primary admin and one secondary admin node in the deployment
Answer: D
NEW QUESTION 28
What is a valid guest portal type?
- A. Sponsored-Guest
- B. My Devices
- C. Captive-Guest
- D. Sponsor
Answer: A
NEW QUESTION 29
A network administrator has just added a front desk receptionist account to the Cisco ISE Guest Service sponsor group. Using the Cisco ISE Guest Sponsor Portal, which guest services can the receptionist provide?
- A. Create and manage guest user accounts.
- B. Keep track of guest user activities.
- C. Authenticate guest users to Cisco ISE.
- D. Configure authorization settings for guest users.
Answer: A
Explanation:
Section: Web Auth and Guest Services
NEW QUESTION 30
Which protocol must be allowed for a BYOD device to access the BYOD portal?
- A. HTTPS
- B. HTTP
- C. SSH
- D. SMTP
Answer: C
NEW QUESTION 31
Which two features are available when the primary admin node is down and the secondary admin node has not been promoted? ()
- A. new AD user 802 1X authentication
- B. BYOD
- C. guest AUP
- D. posture
- E. hotspot
Answer: C,E
NEW QUESTION 32
When setting up profiling in an environment using Cisco ISE for network access control, an organization must use non-proprietary protocols for collecting the information at layer 2. Which two probes will provide this information without forwarding SPAN packets to Cisco ISE? {Choose two.)
- A. SNMP query probe
- B. DNS probe
- C. DHCP SPAN probe
- D. RADIUS probe
- E. NetFlow probe
Answer: B,C
NEW QUESTION 33
Which configuration is required in the Cisco ISE authentication policy to allow Central Web Authentication?
- A. MAB and if user not found, continue
- B. Dot1x and if authentication failed, continue
- C. Dot1x and if user not found, continue
- D. MAB and if authentication failed, continue
Answer: A
Explanation:
Section: Web Auth and Guest Services
NEW QUESTION 34
Which two features must be used on Cisco ISE to enable the TACACS. feature? (Choose two)
- A. Command Sets
- B. Enable Device Admin Service
- C. External TACACS Servers
- D. Device Administration License
- E. Server Sequence
Answer: B,D
NEW QUESTION 35
Which two task types are included in the Cisco ISE common tasks support for TACACS+ profiles? (Choose two.)
- A. Shell
- B. Firepower
- C. IOS
- D. ASA
- E. WLC
Answer: A,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_0100010.html TACACS+ Profile TACACS+ profiles control the initial login session of the device administrator. A session refers to each individual authentication, authorization, or accounting request. A session authorization request to a network device elicits an ISE response. The response includes a token that is interpreted by the network device, which limits the commands that may be executed for the duration of a session. The authorization policy for a device administration access service can contain a single shell profile and multiple command sets. The TACACS+ profile definitions are split into two components:
Common tasks
Custom attributes
There are two views in the TACACS+ Profiles page (Work Centers > Device Administration > Policy Elements > Results > TACACS Profiles)--Task Attribute View and Raw View. Common tasks can be entered using the Task Attribute View and custom attributes can be created in the Task Attribute View as well as the Raw View.
The Common Tasks section allows you to select and configure the frequently used attributes for a profile. The attributes that are included here are those defined by the TACACS+ protocol draft specifications. However, the values can be used in the authorization of requests from other services. In the Task Attribute View, the ISE administrator can set the privileges that will be assigned to the device administrator. The common task types are:
Shell
WLC
Nexus
Generic
The Custom Attributes section allows you to configure additional attributes. It provides a list of attributes that are not recognized by the Common Tasks section. Each definition consists of the attribute name, an indication of whether the attribute is mandatory or optional, and the value for the attribute. In the Raw View, you can enter the mandatory attributes using a equal to (=) sign between the attribute name and its value and optional attributes are entered using an asterisk (*) between the attribute name and its value. The attributes entered in the Raw View are reflected in the Custom Attributes section in the Task Attribute View and vice versa. The Raw View is also used to copy paste the attribute list (for example, another product's attribute list) from the clipboard onto ISE. Custom attributes can be defined for nonshell services.
NEW QUESTION 36
An organization wants to implement 802.1X and is debating whether to use PEAP-MSCHAPv2 or PEAP-EAP-TLS for authentication. Drag the characteristics on the left to the corresponding protocol on the right.
Answer:
Explanation:
NEW QUESTION 37
An engineer is configuring Cisco ISE to reprofile endpoints based only on new requests of INIT-REBOOT and SELECTING message types.
Which probe should be used to accomplish this task?
- A. DNS
- B. DHCP
- C. NMAP
- D. RADIUS
Answer: B
Explanation:
Section: Profiler
NEW QUESTION 38
Which two fields are available when creating an endpoint on the context visibility page of Cisco IS? (Choose two )
- A. IP Address
- B. Identity Group Assignment
- C. Security Group Tag
- D. Policy Assignment
- E. Endpoint Family
Answer: D,E
NEW QUESTION 39
......
Focus on 300-715 All-in-One Exam Guide For Quick Preparation: https://www.dumpsking.com/300-715-testking-dumps.html
Tested Material Used To 300-715: https://drive.google.com/open?id=1YmhtUSgfFXffL-DExHk0Ga0cr3C9-elr
