Oct-2022 HP HPE6-A47 Certification Real 2022 Mock Exam
HPE6-A47 Exam Questions and Valid PMP Dumps PDF
HP HPE6-A47 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
NEW QUESTION 15
An architect plant to purpose an Aruba wireless solution with several Mobility Controllers (MCs) and a Mobility Master (MM) architecture. Wireless users run Skype for Business, a Unified Communications (UC) solution.
The architect plans to use the Aruba SDN capabilities to integrate with the UC solution.
What helps to support high availability specifically for the SDN services?
- A. a redundant master MC
- B. a redundant MM
- C. a cluster deployment for MCs
- D. backup controllers defines on the APs
Answer: B
NEW QUESTION 16
Refer to the exhibit.
The customer needs to expand its wired and wireless network to a new building, Building 2, which is near the existing building, Building 1. The exhibit shows the logical plan that the architect has created so far. The aggregation layer switches in the new building should provide the default gateway services for the VLANs in the new building and route traffic to the core. The existing Aruba Mobility Controllers (MCs) will control the new APs.
What should be the VLAN assignment for Link 1, indicated in the exhibit?
- A. VLANs 21, 22, and 23 only
- B. the default VLAN and VLAN 14
- C. VLANs 11, 12, 13, 21, 22, and 23
- D. an unused VLAN such as 200
Answer: C
NEW QUESTION 17
Refer to the exhibit.
Exhibit 1 shows the logical plan, and Exhibit 2 shows the BOM created with IRIS. An architect plans to propose two 5406Rzl switches as a VSF fabric for a campus network core. Which issue with the plan should the architect correct?
- A. Change the v2 modules to v3 modules.
- B. Change the power supply type.
- C. Add two QSPF+ MP0 SR4 transceivers.
- D. Add stacking modules and cables.
Answer: A
NEW QUESTION 18
Refer to the exhibit.
A customer wants to replace the core and aggregation layer of an existing network. Currently the network routes between the aggregation layer and core, and uses the technologies shown in the exhibit.
The customer now wants to route at the core, instead of the aggregation layer, and extend some of the same VLANs in different buildings. However, the customer cannot eliminate the aggregation layer at this point. What should the architect recommend?
- A. Create a backplane stack at the aggregation layer and a VSF fabric at the core.
- B. Implement broadcast filtering on switch-to-switch links across all of the buildings.
- C. Combine all switches in the aggregation layer and core into a single backplane stack.
- D. Use VRRP on the core and aggregation switches, with the aggregation switches acting as standby.
Answer: C
NEW QUESTION 19
A customer has several clusters of Aruba 325 Instant APs. The customer is happy with the performance of the current APs, but would like to add a Mobility Controller (MC). What should the architect propose?
- A. a Virtual Mobility Controller (VMC) which can be licensed to control Instant APs
- B. conversion of the existing Instant APs to campus APs (CAPs)
- C. the purchase of Universal APs that are the same modes as the current APs.
- D. Aruba ClearPass to onboard the APs as campus APs in the new MC-based deployment
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 20
When configuring split tunnel mode on a Remote AP (RAP) where is the routing function for the split tunnel defined?
- A. In the RAP whitelist
- B. On the AP provisioning screen.
- C. On the IP routing tab in the configuration screen.
- D. In the RAP static routing tables
- E. In the Firewall policy
Answer: E
NEW QUESTION 21
A financial institution has an Aruba wireless system. Each floor is 19 meters by 23 meters (200 feet by 250
feet) and has 20 APs. The organization now requires dedicated Air Monitors (AMs). About how many AMs
should the architect recommend per floor?
- A. about 1 or 2 per floor
- B. about 3 to 5 per floor
- C. about 10 to 12 per floor
- D. about 16 to 20 per floor
Answer: A
NEW QUESTION 22
Refer to the exhibit.
An architect selects 5406R switches for the aggregation layer. What is an appropriate amount of bandwidth for the link aggregation between each aggregation layer VSF fabric and the campus core?
- A. 160 Gbps
- B. 200 Gbps
- C. 60 Gbps
- D. 320 Gbps
Answer: B
NEW QUESTION 23
Refer to the exhibit.
The exhibit shows the current plan for a wired network upgrade.
As much as possible, the customer wants to flatten the architecture and avoid recabling. However, each Building 2 switch must also maintain connectivity to the core if one link fails. What should the architect propose to meet the customer requirements?
- A. Use two additional 2930F switches to act as an aggregation layer for Building 2; connect them to the core on 40 GbE connections.
- B. Extend additional fiber between the buildings so that each Building 2 switch can have a direct 10 GbE connection to the core.
- C. Combine the switches in each Building 2 closet as a VSF fabric; establish two 10 GbE connections to the core per fabric.
- D. Connect each Building 2 switch directly to the core on a single fiber strand through the use of SFP+-SR transceivers.
Answer: C
NEW QUESTION 24
An architect has an Instant AP (IAP) cluster at a mid-sized branch office. The IAP cluster now needs to tunnel corporate traffic to a Mobility Controller (MC) at the main office. However, the branch office should remain functional even if the link to the main office fails. Users at the branch office require access to main office resources, but do not require multicast services.
What is the recommended DHCP mode?
- A. Local
- B. Distributed L2
- C. Distributed L3
- D. Centralized L2
Answer: C
NEW QUESTION 25
For which scenario does an Aruba VIA client provide the solution?
- A. A customer needs to let traveling workers connect to the Internet anywhere and receive secure access to the main site.
- B. A customer needs a client that will simplify connections to the wireless network at the main site no matter what type of authentication the SSID requires.
- C. A customer needs an easy-to-use wireless solution that enables remote workers to connect to the same SSID at the corporate office and at home.
- D. A customer has many telecommuters who take laptops on and offsite and needs a solution to check the security compliance and health of these laptops.
Answer: A
NEW QUESTION 26
Refer to the exhibit.
The customer needs to expand its wired and wireless network to a new building, Building 2, which is near the existing building, Building 1. The exhibit shows the logical plan that the architect has created so far.
The aggregation layer switches in the new building should provide the default gateway services for the VLANs in the new building and route traffic to the core. The existing Aruba Mobility Controllers (MCs) will control the new APs.
What should be the VLAN assignment for Link 1, indicated in the exhibit?
- A. VLANs 21, 22, and 23 only
- B. the default VLAN and VLAN 14
- C. VLANs 11, 12, 13, 21, 22, and 23
- D. an unused VLAN such as 200
Answer: C
NEW QUESTION 27
Refer to the exhibit.
An architect determines that 80 Gbps bandwidth is required for the link aggregation between the Building
1aggregation layer and Building 2. Which transceivers should the architect recommend for each pair of switches?
- A. eight SPF+ LR
- B. two QSPF+ MPO
- C. two QSPF+ BiDi
- D. eight SFP+ SR
Answer: B
NEW QUESTION 28
A plan includes these security settings for the employee WLAN:
1. WPA2-Enterprise with AES encryption
2. 802.1X with PEAP-MSCHAPv2
However, the customer wants to use certificates to authenticate user devices. Which change brings the plan in alignment with the customer requirements?
- A. Add Tunneled TLS (TTLS) as an alternative to PEAP-MSCHAPv2.
- B. Add WPA2-PSK as an alternative to WPA2-Enterprise.
- C. The TKIP encryption instead of AES.
- D. Use EAP-TLS instead of PEAP-MSCHAPv2
Answer: A
NEW QUESTION 29
An architect learns that a customer site is 14,307 square meters (154,000 square feet) and supports 900
employees using WiFi 5 Ghz radio. What additional information should the architect collect to create the RF
plan?
- A. the OS used on wireless devices
- B. whether BLE wayfinding is required
- C. software version on Mobility Controllers (MCs)
- D. number of devices used by each user
Answer: D
NEW QUESTION 30
Refer to the exhibit. The customer needs to expand its wired and wireless network to a new building, Building 2, which is near the existing building, Building 1. The exhibit shows the logical plan that the architect has created so far. The aggregation layer switches in the new building should provide the default gateway services for the VLANs in the new building and route traffic to the core. The existing Aruba Mobility Controllers (MCs) will control the new APs.
What should be the VLAN assignment for Link 1, indicated in the exhibit?
- A. VLANs 21, 22, and 23 only
- B. the default VLAN and VLAN 14
- C. VLANs 11, 12, 13, 21, 22, and 23
- D. an unused VLAN such as 200
Answer: C
NEW QUESTION 31
......
HPE6-A47 Question Bank: Free PDF Download Recently Updated Questions: https://www.dumpsking.com/HPE6-A47-testking-dumps.html
HPE6-A47 Brain Dump: A Study Guide with Tips & Tricks for passing Exam: https://drive.google.com/open?id=1bHQHk0ub8RZkwPqZS5ADqYfF7DlBWP5Q
