Latest May-2026 800-150 Dumps PDF And Certification Training
Check your preparation for Cisco 800-150 On-Demand Exam
NEW QUESTION # 41
Which type of license is locally managed and does not require external tools for management?
- A. RTU licenses
- B. PAK licenses
- C. Hybrid licenses
- D. Smart licenses
Answer: A
Explanation:
Right-To-Use (RTU) licenses are locally managed licenses that allow users to activate specific features on Cisco devices without the need for external tools or connectivity to Cisco's licensing infrastructure. These licenses operate on an honor-based system, where the user agrees to comply with the licensing terms without mandatory enforcement mechanisms.
In contrast:
Hybrid licenses combine aspects of traditional and smart licensing models.
PAK (Product Authorization Key) licenses require registration and activation through Cisco's licensing portal.
Smart licenses necessitate communication with Cisco's Smart Licensing servers for activation and management.
NEW QUESTION # 42
What is the primary advantage of installing and deploying Cisco UCS E-Series servers in branch office routers?
- A. To increase the packet forwarding capacity of the router
- B. To enhance the wireless capabilities of the router
- C. To serve as a backup storage system for the main data center
- D. To provide local compute power for edge applications
Answer: D
Explanation:
Cisco UCS E-Series servers are integrated, blade-style compute modules that can be installed inside Cisco ISR (Integrated Services Routers). Their primary advantage is to provide local compute resources in branch offices without needing a full data center environment.
This enables:
Hosting of virtual machines or applications locally
Reduced latency for edge computing
Lowered dependency on central data center resources
These servers are ideal for running branch-office workloads, virtualization, or edge analytics, allowing enterprises to deploy scalable compute capabilities closer to the data source.
NEW QUESTION # 43
What is the purpose of the packages.conf file in Install mode on Cisco IOS XE Software supported switches?
- A. It is a subdirectory in flash memory where individual software packages are stored.
- B. It contains the entire bundled software image in a single file.
- C. It is used to extract the bin file during the installation process.
- D. It determines which software packages need to be loaded and in what order during boot up.
Answer: D
Explanation:
In Install mode, the packages.conf file plays a crucial role in the boot process of Cisco IOS XE Software. It specifies the list of software packages to be loaded and the sequence in which they should be initialized during system startup. This file ensures that all necessary components are correctly loaded, providing a modular and flexible approach to software management.
Contrary to the other options:
The packages.conf file does not extract the bin file; it references already extracted packages.
It does not contain the entire bundled image; that's characteristic of Bundle mode.
While it resides in the flash memory, it is not a subdirectory but a configuration file.
NEW QUESTION # 44
How many bits are borrowed from the default host portion of the address to create subnets in a Class B network with a subnet mask 255.255.255.0?
- A. 3 bits
- B. 8 bits
- C. 3 bits
- D. 5 bits
Answer: B
Explanation:
In a Class B network, the default subnet mask is 255.255.0.0, which allocates:
16 bits for the network portion
16 bits for the host portion
When the subnet mask is changed to 255.255.255.0, it becomes:
24 bits for the network portion
8 bits for the host portion
This indicates that 8 bits have been borrowed from the host portion to create additional subnets. Borrowing bits allows for the division of the original network into smaller sub-networks, enhancing organization and security within the network.
NEW QUESTION # 45
Drag and drop the Cisco collaboration endpoints from the left onto the corresponding descriptions on the right.
Answer:
Explanation:
Explanation:
* Cisco Room Kit# All-in-one devices for personal workspaces and meeting rooms
* Cisco Desk Series# Standalone modular video conferencing systems
* Quad Camera# Multi-angle video capture for immersive experiences
* Room Navigator# Touch panel for room controls and scheduling
* Cisco Board# Interactive touchscreen displays supporting video conferencing Cisco's collaboration portfolio includes a wide variety ofhardware endpointsused toenhance remote communication and conference room experiences. These are highlighted in the FLDTEC material as follows:
* Cisco Room Kit: Combines camera, codec, speakers, and microphones into one device - designed for easy integration with displays in meeting spaces.
* Cisco Desk Series: Purpose-built for desktop video conferencing and modular setups.
* Quad Camera: Offersautomatic speaker trackingandintelligent framing, used in large rooms for immersive experiences.
* Room Navigator: Used tocontrol meetings, reserve rooms, and manage smart building functions.
* Cisco Board: Interactive digital whiteboard that integratesvideo conferencing, whiteboarding, and wireless sharing.
NEW QUESTION # 46
What is the primary purpose of backing up the endpoint configuration prior to replacing the device?
- A. To troubleshoot network connectivity issues
- B. To generate a performance report for the old device
- C. To update the firmware of the device
- D. Torestore settings on the new device after replacement
Answer: D
Explanation:
Backing up the configuration of a network device before replacement is a critical step to ensure business continuity and minimize downtime. The primary purpose of this backup is torestore the existing settings onto the new device, ensuring that it operates identically to the one being replaced.
This process includes preserving interface configurations, routing protocols, access control lists, and other essential parameters. By restoring the backed-up configuration to the new device, network administrators can quickly reintegrate it into the network infrastructure without the need for manual reconfiguration, thereby reducing the risk of errors and service disruptions.
Options A, B, and C do not align with the primary objective of configuration backups in the context of device replacement.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Maintenance and RMA Procedures
NEW QUESTION # 47
What is the main advantage of using Bundle mode when installing Cisco IOS XE Software on a switch?
- A. Ability to install and upgrade packages independently
- B. Faster boot times compared to Install mode
- C. Simplicity, with no need to manage individual packages
- D. Automatic creation of the packages.conf file
Answer: C
Explanation:
Bundle modesimplifies the installation and operation of Cisco IOS XE Software by using a monolithic image file. In thismode, the switch runs directly from the bundled image, eliminating the need to manage individual software packages. This approach is straightforward and reduces complexity, making it suitable for environments where simplicity is a priority.
However, it's important to note that:
* Bundle mode may result in slower boot times compared to Install mode.
* It does not support the independent installation or upgrade of individual packages.
* Thepackages.conffile is not utilized in Bundle mode; it's specific toInstall mode.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco IOS Software Basics
NEW QUESTION # 48
What is the purpose of the pre-service checklist in the endpoint replacement process?
- A. To test the functionality of the existing endpoint
- B. To ensure all necessary tools and personnel are available
- C. To gather information about the replacement unit
- D. To verify the current configuration settings of the endpoint
Answer: B
Explanation:
A pre-service checklist is a procedural step followed before replacing an endpoint. Its primary purpose is to confirm that all resources, tools, documentation, and personnel are in place to execute the replacement efficiently and without delays.
It helps avoid service interruptions and ensures a smooth replacement by ensuring that every necessary component and action is accounted for ahead of time.
NEW QUESTION # 49
Why is it important to verify the update status after the initial upgrade process when upgrading firmware on a Cisco UCS C-Series server using the Host Upgrade Utility?
- A. To confirm that all intended components were successfully updated
- B. To ensure compatibility with third-party applications
- C. To activate the new licenses associated with the firmware
- D. To generate a report for compliance documentation
Answer: A
Explanation:
After upgrading the firmware on a Cisco UCS C-Series server using the Host Upgrade Utility (HUU), it is critical to verify the update status to ensure that all targeted components (such as BIOS, CIMC, and RAID controller firmware) have been successfully updated.
Firmware upgrades often involve multiple subsystems, and partial or failed updates can result in inconsistencies or even device instability. Verifying the update status allows the technician to identify any missed components and perform corrective actions if necessary.
Options like generating compliance reports, third-party application checks, or license activations are not the primary reasons for this verification step in the HUU process.
NEW QUESTION # 50
Which command is used to copy the startup configuration of a device to a USB file system when transferring files to a Cisco device?
- A. Router# copy startup-config usbflash0:[filename]
- B. Router# copy running-config usbflash0:[filename]
- C. Router# copy usbflash0:[filename] startup-config
- D. Router# copy startup-config tftp://[server_ip]/[destination_file]
Answer: A
Explanation:
To back up the startup configuration of a Cisco device to a USB drive, the commandcopy startup-config usbflash0:[filename]is used. This command copies the contents of the startup configuration file stored in NVRAM to a specified file on the USB flash drive. This is particularly useful for creating backups before performing upgrades or replacements.Option A:Copies the startup configuration to a TFTP server, not a USB drive.
* Option B:Attempts to copy from the USB drive to the startup configuration, which is the reverse of the desired operation.
* Option D:Copies the running configuration, not the startup configuration, to the USB drive.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Maintenance and RMA Procedures
NEW QUESTION # 51
Which term describes the physical range of radio frequency coverage provided by an access point in a wireless topology?
- A. Basic Service Area (BSA)
- B. Service Set Identifier (SSID)
- C. Wireless LAN Controller (WLC)
- D. Wireless LAN (WLAN)
Answer: A
Explanation:
In wireless networking, theBasic Service Area (BSA)refers to the physical area of radio frequency coverage provided by an access point (AP) in a Basic Service Set (BSS). The BSA defines the coverage area where wireless clients can connect to the network through the AP. The size and shape of a BSA depend on various factors, including the AP's transmit power, antenna type, and physical environment.
Option A, the Service Set Identifier (SSID), is the network name broadcast by the AP. Option C, Wireless LAN (WLAN), refers to the overall wireless network. Option D, Wireless LAN Controller (WLC), is a device that manages multiple APs in a network.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Wireless Device Support
NEW QUESTION # 52
Which hardware platform is Cisco Unified Communications Manager typically deployed on?
- A. Cisco ISR routers
- B. Cisco Catalyst switches
- C. Cisco UCS C-Series servers
- D. Cisco ASR routers
Answer: C
Explanation:
Cisco Unified Communications Manager (CUCM) is typically deployed on Cisco UCS C-Series servers. These rack-mount servers provide the necessary computing resources to support CUCM's call control and session management functions in enterprise environments. The UCS C-Series servers offer scalability, reliability, and integration capabilities essential for unified communications deployments.
Options A (Cisco ASR routers), B (Cisco Catalyst switches), and C (Cisco ISR routers) are networking devices designed for routing and switching functions and are not intended as platforms for deploying CUCM.
NEW QUESTION # 53 
Refer to the exhibit. Which component is highlighted on the Cisco I/O module image?
- A. chassis connections LED
- B. fan module LED
- C. fixed port
- D. captive screw
Answer: A
Explanation:
The highlighted component on the Cisco I/O module is the chassisconnections LED, which indicates the status of connectivity between the I/O module and the chassis.
In the exhibit, the orange arrow points to asmall rectangular LED indicatorlocated to the left side of the I/O module (Cisco UCS-IOM-2304). This specific LED isnot aligned with the ports, fans, or screws, which helps identify it correctly.
Chassis connections LED (B)is responsible for indicating thestatus of uplink/downlink communication between the I/O module and the chassis.
* Greenusually indicates a healthy link.
* Amberoroffmay indicate a problem or no connection.
Why the other answers are incorrect:
* A. Captive screw# These are at the far corners, not where the arrow points.
* C. Fan module LED# This IOM doesn't have user-visible fan LEDs atthe front face.
* D. Fixed port# These are the large rectangular SFP ports clearly visible in the middle, not near the arrow.
This identification is important whentroubleshooting chassis-to-IOM connectivityor verifyingmodule status LEDsduring field maintenance.
NEW QUESTION # 54
Which two components are accessed by removing the chassis cover on Cisco Catalyst 8000 Series Edge platforms? (Choose two.)
- A. Network Interface Modules
- B. Transceivers
- C. DIMMs
- D. Fan trays
- E. SSDs
Answer: C,E
Explanation:
On Cisco Catalyst 8000 Series Edge platforms, removing the chassis cover provides access to internal components such asDIMMs (Dual In-line Memory Modules)andSSDs (Solid-State Drives). These components are located internally and require the removal of the chassis cover for maintenance or replacement.
* DIMMsare used for system memory and are essential for the router's operation.
* SSDsprovide storage for system software and configurations.
Other components likeNetwork Interface Modules (NIMs)andtransceiversare typically accessible externally and do not require chassis cover removal.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco Equipment and Related Hardware
NEW QUESTION # 55
Which pod-based deployment model provides the most flexibility and scalability in a modern data center topology?
- A. Top of Rack (ToR)
- B. Fabric Extender model
- C. Spine-and-Leaf
- D. End of Row (EoR)
Answer: C
Explanation:
The Spine-and-Leaf architecture is the preferred pod-based deployment model in modern data centers because of its high scalability and flexibility. In this topology:
Leaf switches connect to servers and act as the access layer.
Spine switches function as the core layer, interconnecting all leaf switches.
This non-blocking, highly redundant model supports predictable latency, easy horizontal scaling, and load balancing, making it ideal for cloud-scale and virtualized environments.
Top of Rack (ToR) and End of Row (EoR) are physical cabling layouts that do not inherently provide the same level of architectural scalability.
Fabric Extender models extend switch ports but depend on upstream switches for intelligence, limiting flexibility.
NEW QUESTION # 56
Which function does the Stack Port 1 serve on a Cisco Meraki switch?
- A. It connects to the Stack Port 2 of the next switch in a stack configuration.
- B. It serves as a high-speed interconnect for clustered switches.
- C. It provides a dedicated uplink to the Meraki cloud for management.
- D. It connects to the Stack Port 2 of the previous switch in a stack configuration.
Answer: B
Explanation:
On Cisco Meraki switches, Stack Port 1 (along with Stack Port 2) is used to form a physical stacking connection between multiple switches. These stack ports are dedicated high-speed interconnects that enable multiple switches to operate as a single logical switch.
The stacking topology depends on the number of switches, but Stack Port 1 serves as one side of this high-speed inter-switch communication channel - not for management or cloud access.
NEW QUESTION # 57
Which mode must the console terminal of the device be in before a prewritten configuration is pasted to transfer the configuration from an old device to a new one?
- A. Global configuration mode
- B. Privileged EXEC mode
- C. User EXEC mode
- D. Interface configuration mode
Answer: A
Explanation:
To apply a prewritten configuration to a new Cisco device, the console terminal must be inGlobal Configuration Mode. This mode allows administrators to enter configuration commands that affect the device's overall operation. To access Global Configuration Mode, one must first enter Privileged EXEC Mode by typingenable, and then enterconfigure terminal. Once in Global Configuration Mode, theprewritten configuration can be pasted, and the device will accept the commands accordingly.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Device Configuration and Verification
NEW QUESTION # 58
Which management option is best suited for standalone Cisco Secure Firewall deployments?
- A. Cisco Security Manager
- B. Cisco Defense Orchestrator
- C. Cisco Secure Firewall Management Center
- D. Cisco Secure Firewall Device Manager
Answer: D
Explanation:
For standalone Cisco Secure Firewall deployments, theCisco Secure Firewall Device Manager (FDM)is the most appropriate management option. FDM is a browser-based, on-box management tool that allows administrators to configure and manage a single firewall device without the need for external management infrastructure. It provides an intuitive interface for basic configurations, policy management, and monitoring.
In contrast:
* Cisco Secure Firewall Management Center (FMC)is designed for centralized management of multiple firewall devices.
* Cisco Defense Orchestrator (CDO)is a cloud-based solution for managing security policies across various devices.
* Cisco Security Manageris an older platform primarily used for managing ASA devices.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco Equipment and Related Hardware
NEW QUESTION # 59
Drag and drop the steps of the boot sequence process of a Cisco device into order on the right.
Answer:
Explanation:
.
NEW QUESTION # 60
What must be considered when installing a new fan module in a fixed-configuration Cisco Nexus switch?
- A. The airflow direction must be consistent with other installed modules.
- B. The size of the fan module must match the power supply.
- C. Fan modules can be installed only when the switch is powered off
- D. The fan module must be from the same manufacturing batch as the others.
Answer: A
Explanation:
When installing a fan module in a Cisco Nexus fixed-configuration switch, it's crucial to ensure that the airflowdirection of the new fan matches the existing airflow configuration. Mismatched airflow directions can lead to inefficient cooling or even overheating of components, potentially affecting the performance or lifespan of the switch.
Cisco offers fan modules infront-to-backorback-to-frontairflow variants, and consistency is required for proper thermal management. These modules are also typically hot-swappable, meaning powering down the switch is not necessary.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Maintenance and RMA Procedures
NEW QUESTION # 61
What is the primary purpose of changing the configuration register when performing password recovery?
- A. To enable advanced debugging features
- B. To erase the entire configuration
- C. To unlock all user accounts
- D. To ignore the startup configuration
Answer: D
Explanation:
During password recovery on Cisco devices, the configuration register is modified to instruct the device to bypass the startup configuration stored in NVRAM. This allows administrators to access the device without being prompted for existing passwords. The standard procedure involves changing the configuration register value to 0x2142, which tells the device to ignore the startup configuration during the next boot. Once access is gained, the administrator can reset passwords and then restore the original configuration by resetting the configuration register to its default value, typically 0x2102.
NEW QUESTION # 62
What is the first action that must be taken before removing a standby supervisor module from a Cisco MDS 9700 Series Switch?
- A. Put the module into out-of-service mode.
- B. Shut down the entire switch.
- C. Disconnect all network interface cables.
- D. Perform a manual failover to the standby supervisor.
Answer: A
Explanation:
In the FLDTEC course, the process for removing or replacing a supervisor module - especially the standby supervisor - in a modular switch like the Cisco MDS 9700 is clearly outlined. Cisco documentation states:
"Before removing a standby supervisor module, it must first be placed into out-of-service mode using the CLI command system no supervisor <slot-number> or via the appropriate management interface." This action ensures the system acknowledges the supervisor is no longer participating in redundancy, allowing a safe and controlled removal without impacting system operations.
Why not the other options?
A . Shut down the entire switch → Not required; MDS switches are built for high availability and allow hot-swap operations.
C . Disconnect all network interface cables → This applies to line cards or interfaces, not to supervisor removal specifically.
D . Perform a manual failover → Failover is required when removing the active supervisor, not the standby one.
NEW QUESTION # 63
Drag and drop the configuration tasks for restoring software from the left onto the corresponding commands on the right.
Answer:
Explanation:
NEW QUESTION # 64
Which command is used to specify the source for the Cisco IOS software image to load during the boot process?
- A. boot ios
- B. boot system
- C. boot image
- D. boot source
Answer: B
Explanation:
Theboot systemcommand is used in globalconfiguration mode to specify the source and filename of the Cisco IOS software image that should be loaded during the device's boot process. This command ensures that the device loads a specific IOS image, whether it's stored locally in flash or fetched from a TFTP server.
Syntax example:
boot system flash:c1900-universalk9-mz.SPA.157-3.M3.bin
* boot image,boot ios, andboot sourceare invalid or non-existent in standard Cisco IOS.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) -Cisco IOS Software Basics
NEW QUESTION # 65
......
Cisco 800-150 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
Valid 800-150 Dumps for Helping Passing Cisco Exam: https://www.dumpsking.com/800-150-testking-dumps.html
Practice Exam 800-150 Realistic Dumps Verified Questions: https://drive.google.com/open?id=1agODzdOVU8f4Nwhq6wCOWDM9slnwZE8U
