Get 2025 Most Reliable Network Appliance NS0-164 Training Materials [Q20-Q43]

Share

Get 2025 Most Reliable Network Appliance NS0-164 Training Materials

The Realest Study Materials NS0-164 Dumps

NEW QUESTION # 20
When configuring SyncMirror disk pools, which platforms require disks connected to particular ports and/or FC adapters on particular ports?

  • A. FAS 6040, 6080
  • B. FAS 3020, 3050
  • C. FAS 3020, 3040, 3050, 6040
  • D. FAS 3040, 3070, 6080

Answer: B


NEW QUESTION # 21
Which ONTAP feature combines multiple writes into a single 4K block on the aggregate?

  • A. Aggregate-level deduplication
  • B. Volume-level deduplication
  • C. Data compaction
  • D. Data compression

Answer: C


NEW QUESTION # 22
Which one of the following statements does not apply to Nearstore Personality?

  • A. Converts the destination storage system to a Nearstore system
  • B. This feature requires the nearstore_option license on the destination storage system
  • C. The feature is available to all NetApp storage systems
  • D. Provides increased concurrent streams when the storage systems are used as destinations for SnapMirror and SnapVault transfers

Answer: C


NEW QUESTION # 23
The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from your primary system.

  • A. True
  • B. False

Answer: A


NEW QUESTION # 24
Which MetroCluster configuration procedure is recommended for re-establishing a mirrored volume that was in a level-0 re synchronization state when it failed?

  • A. Rejoin the two volumes.
  • B. Re-create the synchronous mirror
  • C. Determine which volumes are at the remote and disaster sites.
  • D. Turn on power to the cluster node at the disaster site.

Answer: B


NEW QUESTION # 25
Refer to the exhibit.

An administrator creates a new qtree and an associated export policy. When the client tries to connect, they are denied.
What should the administrator do?

  • A. Replace the IP with the client hostname in the qtree export policy
  • B. Update the superuser entry lo "any" in the volume export-policy
  • C. Add a new rule in the qtree export policy in allow read-write access for the new host
  • D. Add the new host IP with at least read access to the volume export-policy

Answer: C


NEW QUESTION # 26
Identify the two SnapMirror commands that are entered on the destination storage appliance.

  • A. snapmirror release
  • B. options snapmirror.access on
  • C. snapmirror resync
  • D. snapmirror initialize

Answer: C,D


NEW QUESTION # 27
Which command displays the disk ownership for both CPU modules in a FAS270C appliance?

  • A. disk show-v
  • B. vol status -r
  • C. disk own -s
  • D. disk display-r

Answer: A


NEW QUESTION # 28
Which OSSV package would you use to perform an OSSV unattended installation?

  • A. unattendpackager
  • B. svconfigpackager
  • C. svunattendossv
  • D. None of the above

Answer: B


NEW QUESTION # 29
An administrator Is troubleshooting failover to an ONTAP SVM-DR destination cluster. The failover test works but stops replication. The administrator has a requirement to keep SnapMirror replication running while performing the failover test.
What ONTAP feature will accomplish this task?

  • A. FlexClone
  • B. SnapRestore
  • C. SM-BC
  • D. SMS

Answer: C


NEW QUESTION # 30
Which option of the snap restore command allows you to specify a different directory, as long as the directory already exists?

  • A. snap restore-c
  • B. snap restore -s
  • C. snap restore-r
  • D. snap restore-d

Answer: C


NEW QUESTION # 31
For each Open Systems platform directory to be backed up to the SnapVault secondary storage system, you must execute _____ from the primary to secondary storage system.

  • A. an initial baseline copy
  • B. an incremental copy
  • C. a temporary copy
  • D. a scheduled update copy

Answer: A


NEW QUESTION # 32
What is the minimum number of HA pairs required for Epsilon to be automatically assigned?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C


NEW QUESTION # 33
Each storage appliance in a cluster must have network access to the

  • A. cluster partner.
  • B. same collection of subnets.
  • C. same administration host.
  • D. Internet.

Answer: B


NEW QUESTION # 34
Which two tools should an administrator use to manage NVMe namespaces? (Choose two.)

  • A. System Manager
  • B. Config Advisor
  • C. SAN Host Tools
  • D. ONTAP CLI

Answer: A,D


NEW QUESTION # 35
An aggregate is composed of twelve 36-Gigabyte disks. A drive fails and only 72-Gigabyte spare disks are available Data ONTAP will then perform what action?

  • A. chooses a 72-Gigabyte disk and right-size it
  • B. alerts you that there are no 36-Gigabyte disks and wait for one to be inserted
  • C. halts after 24 hours of running in degraded mode
  • D. chooses a 72-Gigabyte disk and use it as is

Answer: A


NEW QUESTION # 36
After issuing the aggr split aggr0/plex0 aggrNew command ____________.

  • A. flexible volumes are evenly split between aggr0 and aggrNew
  • B. there are two unmirrored aggregates, aggr0 and aggrNew
  • C. there is a new mirrored aggregate called aggrNew
  • D. there is a new plex called aggrNew
  • E. there are two new plexes, plex0 and plexNew

Answer: B


NEW QUESTION # 37
Which three tools present statistics from the Data ONTAP counter manager? (Choose three.)

  • A. operations manager
  • B. windows perfmon
  • C. sysstat
  • D. stats

Answer: A,B,D


NEW QUESTION # 38
To restore a primary SnapVault qtree to the exact qtree location on the primary storage system (from which it was backed up), you must:

  • A. Delete the existing qtree from the secondary storage system
  • B. Add the new qtree to the primary storage system
  • C. Restore to a non-existing qtree
  • D. Overwrite the existing qtree on the primary storage system

Answer: C


NEW QUESTION # 39
What is the format for snapvault schedule?

  • A. YYYY-MM-DD
  • B. crontab format
  • C. cnt[@day_list][@hour_list]
  • D. List of dates in ISO Date format

Answer: C


NEW QUESTION # 40
Identify the two SnapMirror commands that are entered on the source storage appliance.

  • A. snapmirror resync
  • B. snapmirror initialize
  • C. options snapmirror.access on
  • D. snapmirror status

Answer: C,D


NEW QUESTION # 41
What predefined SVM role provides management for NDMP operations?

  • A. vsadmin-protocol
  • B. wsadmin-voluma
  • C. vsadmin-backup
  • D. vsadmin-readonly

Answer: C


NEW QUESTION # 42
Which ONTAP feature allows the most efficient use of disk space for provisioning root aggregates?

  • A. ADP
  • B. DDP
  • C. XDP
  • D. XCP

Answer: A


NEW QUESTION # 43
......

LATEST NS0-164 Exam Practice Material: https://www.dumpsking.com/NS0-164-testking-dumps.html

New NS0-164 Actual Exam Dumps,  Network Appliance Practice Test: https://drive.google.com/open?id=1A-0_M-VInbR4MZW3hipUJNQ-kXHFQRc6