[Feb 08, 2025] Updates Up to 365 days On Valid 300-630 Braindumps
Best Quality300-630 Exam Questions Cisco Test To Gain Brilliante Result
Cisco 300-630 certification is ideal for IT professionals who want to advance their careers in network engineering or network architecture. Implementing Cisco Application Centric Infrastructure - Advanced certification demonstrates that the candidate has the skills and knowledge required to design, implement, and manage complex network infrastructures using Cisco's ACI solution. Implementing Cisco Application Centric Infrastructure - Advanced certification is also valuable for IT professionals who work for organizations that use ACI, as it demonstrates their expertise in this technology.
The 300-630 exam is a challenging test that requires a deep understanding of the Cisco ACI technology and its advanced features. Candidates should be able to configure and troubleshoot complex ACI environments, as well as develop and implement policies for various applications. They should also be familiar with the tools and techniques for monitoring and analyzing network traffic, identifying performance bottlenecks, and resolving issues in a timely manner.
NEW QUESTION # 27
What is a characteristic of a stretched bridge domain solution between Cisco ACI sites with Layer
2 flood disabled?
- A. The tenant and VRF that associated to the bridge domain have local significance in each site.
- B. IP mobility is ensured between sites for disaster recovery.
- C. The application profile that is associated to the bridge domain have local significance in each site.
- D. Headend replication is used for BUM traffic between sites.
Answer: B
NEW QUESTION # 28
Which action reduces the impact on workload when migrating from the existing Cisco NX-OS VXLAN network infrastructure to the Cisco ACI fabric?
- A. Disable bridge domain unicast routing while a default gateway is in VXLAN infrastructure
- B. Use ACI spines for the Cisco ACI and VXLAN fabrics
- C. Configure vPC between the standalone Nexus and the Cisco ACI leaf
- D. Set the default gateway in the Cisco ACI and VXLAN fabrics
Answer: D
NEW QUESTION # 29 
Refer to the exhibit. Drag and drop the subnets and flags from the left into the External Network Instance Profile policies on the right to create a setup that advertises only 10.10.0.0/24 and 10.10.1.0/24 prefixes in VRF1 and establishes connectivity between VRFs. Not all options are used.
Answer:
Explanation:
Explanation:
Graphical user interface Description automatically generated
NEW QUESTION # 30
Where are STP BPDUs flooded in Cisco ACI fabric?
- A. in the native VLAN ID
- B. in the access encapsulation VLAN part of different VLAN pools
- C. in the bridge domain VLAN
- D. in the VNID that is assigned to the FD VLAN
Answer: C
Explanation:
Section: Traditional network with ACI
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-737909.html
NEW QUESTION # 31
Leaf 1002 receives a packet from a host attached to Leaf1001. The packet contains the MAC address. IP address, and VRF of the source. Which information does each node learn?
- A. Leaf1001 learns the IP address of the source.
Spine2001 learns the IP address of the source - B. Leaf 1002 learns the IP address of the source.
Spine2001 learns the VRF of the source. - C. Leaf1001 learns the MAC address of the source.
Leaf1002 learns the IP address of the source. - D. Leaf 1002 learns the VRF of the source.
Leaf1002 learns the IP address of the source.
Answer: D
NEW QUESTION # 32
What is a design implication for Cisco ACI using an application-centric approach?
- A. VLAN numbers are in the names of the bridge domain and EPG objects
- B. One VLAN equals one EPG equals one bridge domain
- C. Multiple VLANs and/or multiple EPGs are under one bridge domain
- D. One EPG is mapped to multiple bridge domains
Answer: C
NEW QUESTION # 33
Refer to the exhibit. New e-commerce software is deployed on Cisco ACI fabric. The environment must meet these requirements:
- The overall number of contracts must be reduced by reusing the
existing contracts within a VRF when possible.
- The e-commerce software must communicate only with software EPGs that are part of the same ANP.
- The e-commerce software must be prevented from communicating with
applications in different ANPs.
Which scope must be selected to meet these requirements?
- A. Endpoint Group
- B. Global
- C. Application Profile
- D. Tenant
Answer: C
NEW QUESTION # 34 
Refer to the exhibit. Which three actions should be taken to implement the vPC in the Cisco ACI fabric?
(Choose three.)
- A. Select a common vPC interface policy group
- B. Select individual interface profiles
- C. Select common switch profiles
- D. Select common interface profiles
- E. Select individual switch profiles
Answer: A,B,C
Explanation:
Section: Advanced ACI Policies and Integrations
NEW QUESTION # 35
An engineer is implementing the Cisco ACI fabric but is experiencing loops detected from endpoints. When the issue was investigated, it was discovered that the packets are received with the same source IP address but from different leaf switch ports. The engineer must prevent the issue from happening in the future and make sure that the port is brought back up if it was disabled due to the loop discovered. Which set of actions must be taken to meet these requirements?
- A. Enable the enforce endpoint check and set the Rouge EP detection interval
- B. Enable the rogue endpoint and set the Error Disabled Recovery Policy
- C. Enable reverse path forwarding and set the Hold Interval
- D. Enable the remote endpoint limit and set the Interface override
Answer: B
Explanation:
To address loops detected from endpoints in a Cisco ACI fabric, the engineer should enable the rogue endpoint feature and set the Error Disabled Recovery Policy. This will allow the system to detect rogue endpoints causing loops and automatically recover the port if it was disabled due to the loop detection2.
References := ( Implementing Cisco Application Centric Infrastructure Official Cert Guide )
NEW QUESTION # 36
What are two characteristics of Cisco ACI and Spanning Tree Protocol interaction? (Choose two.)
- A. BPDU filter and BPDU guard can be configured on Cisco ACI leaf edge ports.
- B. Cisco ACI must be configured as the STP root for all VLANs.
- C. When a TCN BPDU is received in a VLAN, Cisco ACI flushes the endpoints for the associated encapsulation.
- D. STP BPDUs are dropped due to MCP.
- E. MST BPDUs are flooded correctly in Cisco ACI fabric without additional configuration.
Answer: A,C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/aci_virtual_edge/configuration/1- x/b_Virtual_Edge_Config_Guide_1_2_2/b_Virtual_Edge_Config_Guide_1_2_2_chapter_0101.ht ml
NEW QUESTION # 37
Drag and Drop Question
Refer to the exhibit. Drag and drop the subnets and flags from the left into the External Network Instance Profile policies on the right to create a setup that advertises only 10.10.0.0/24 and
10.10.1.0/24 prefixes in VRF1 and establishes connectivity between VRFs. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 38
Refer to the exhibit.
An engineer must have communication between EPG1 in VRF1 and External EPG in VRF2. Which three actions should be taken for the defined subnets in the L3Out External EPG to accomplish this goal? (Choose three.)
- A. Enable Shared Route Control Subnet
- B. Enable Shared Security Import Subnet
- C. Enable External Subnets for External EPG
- D. Enable Import Route Control Subnet
- E. Enable Aggregate Shared Routes
- F. Enable Export Route Control Subnet
Answer: B,D,F
NEW QUESTION # 39
What are two PBR characteristics of the Cisco ACI Active-Active Across Pods deployment mode in Cisco ACI Multi-Pod design? (Choose two.)
- A. Traffic is dynamically redirected to the firewall that owns the connection.
- B. Deployment occurs in transparent mode.
- C. Deployment occurs in go-to mode only.
- D. The connection state is unsynchronized.
- E. This mode causes the traffic to flow asymmetrically
Answer: B,E
NEW QUESTION # 40
Refer to the exhibit.
Which configuration must be implemented on L3Out EBGP to advertise out of the fabric 172.16.2.0/24 network that is learned from L3Out OSPF?
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: D
NEW QUESTION # 41
An organization expands a Cisco ACI Multi-Pod from two to six pods and must ensure that the control plane scales. What should be configured in the IPN to ensure that BUM traffic is forwarded efficiently across the IPN?
- A. MP-BGP
- B. BIDIR-PIM
- C. MSDP
- D. spine headend replication
Answer: D
Explanation:
In a Cisco ACI Multi-Pod environment that is expanding, spine headend replication should be configured to ensure efficient forwarding of BUM (Broadcast, Unknown unicast, Multicast) traffic across the IPN (Inter-Pod Network). This configuration optimizes the control plane scaling and ensures that BUM traffic is handled effectively, maintaining network performance and stability.
References: Implementing Cisco Application Centric Infrastructure Official Cert Guide
NEW QUESTION # 42
Which protocol is used to exchange the MAC/IP address information for endpoints between spine switches in different pods in a Cisco Multi-Pod solution?
- A. MP-BGP EVPN
- B. BGP VPNv4
- C. IS-IS
- D. GRE
Answer: A
NEW QUESTION # 43
How is broadcast forwarded in Cisco ACI Multi-Pod after ARP flooding is enabled?
- A. For the specific bridge domain, all spines forward the broadcast frames to IPN routers
- B. Ingress replication is used on the spines to forward broadcast frames in the IPN infrastructure
- C. Within a pod, the ingress leaf switch floods the broadcast frame on all fabric ports
- D. Broadcast frames are forwarded inside the pod and across the IPN using the multicast address that is associated to the bridge domain
Answer: D
NEW QUESTION # 44
An engineer is deploying a Cisco ACI fabric and discovers that the traffic to certain endpoints is dropped. The originating bridge domain is configured with hardware proxy. Which action prevents this problem?
- A. Set the L2 Unknown Unicast option to Hardware-Proxy for Layer 2 switched traffic.
- B. Enable the ARP Flooding option under the bridge domain for Layer 3 routed traffic.
- C. Set the L2 Unknown Unicast option to Flood for Layer 2 switched traffic.
- D. Disable the ARP Flooding option under the bridge domain for Layer 3 routed traffic.
Answer: B
NEW QUESTION # 45
......
Focus on 300-630 All-in-One Exam Guide For Quick Preparation: https://www.dumpsking.com/300-630-testking-dumps.html
Tested Material Used To 300-630: https://drive.google.com/open?id=1qKVdxbKdIw9-utt67_yZGnLEZwfbb6k3
