E_S4HCON2022 PDF Dumps Apr 01, 2022 Exam Questions – Valid E_S4HCON2022 Dumps
Ultimate E_S4HCON2022 Guide to Prepare Free Latest SAP Practice Tests Dumps
NEW QUESTION 34
You are performing an upgrade of an SAP ECC development system with SUM. What is the earliest point when the upgrade is considered complete and you can allow all dialog users to log on to the system?
Please choose the correct answer.
Response:
- A. During the SUM roadmap step "Postprocessing", after the post procedure steps are complete
- B. During the SUM roadmap step "Postprocessing", in parallel with post procedure steps
- C. After the SUM roadmap step "Execution" is finished and before "Postprocessing"
- D. After the SUM roadmap step "Postprocessing" and post procedure steps are finished
Answer: A
NEW QUESTION 35
When using the DMO of SUM, which files can be handled by SUM in the download directory?
There are 2 correct answers to this question.
Response:
- A. Breakpoint configuration file SAPUPPHAS.BRK
- B. MIGRATE J5T_DUR_XML file from a previous run
- C. Stack XML file calculated by the Maintenance Planner
- D. Parameter file SAPup_add.par
Answer: B,C
NEW QUESTION 36
You are performing an upgrade with SUM using DMO to an AS ABAP 7.50 based SAP system. You entered a specific number of R3Ioad processes during Roadmap step "Extraction".
Where can you change this during the migration via the Utilities option of the SUM UI?
There are 2 correct answers to this question
Response:
- A. In SUM Parameters
- B. In SUM Phaselist
- C. In Process Control Center
- D. In DMO Migration Preparation
Answer: A,C
NEW QUESTION 37
You are performing an upgrade with SUM. You are in the BIND_PATCH phase of the roadmap step "Configuration". For some software components you find entries in the "Calculated level" column.
What does the "Calculated level" indicate for those software components?
Please choose the correct answer.
Response:
- A. The SAP Support Packages that will be bound to the upgrade
- B. The SAP Support Packages found in the download directory
- C. The SAP Support Packages contained in the upgrade media
- D. The SAP Support packages of the Support Package Stack, calculated by the Maintenance Planner
Answer: B
NEW QUESTION 38
You are preparing for a standard SAP S/4HANA conversion from SAP ECC on Windows with SAP MaxDB to SAP S/4HAN. You are performing the corresponding maintenance transaction with the Maintenance Planner. Which kernels do you need to select for the SAP S/4HANA conversion?
There are 2 correct answers to this question.
- A. Kernel for target release, Windows, SAP HANA
- B. Kernel for target release, Linux, SAP HANA
- C. Kernel for source release, Windows, SAP MaxDB
- D. Kernel for target release, Windows, SAP MaxDB
Answer: A,C
NEW QUESTION 39
In which part of an upgrade does SUM allow you to generate ABAP loads (SGEN)?
There are 2 correct answers to this question.
- A. Post-downtime
- B. During downtime
- C. During uptime
- D. During SPDD
Answer: A,C
NEW QUESTION 40
Which circumstances will allow SUM to run without the creation of a shadow system?
Please choose the correct answer.
Response:
- A. Using the main configuration option "Single System" in case of an upgrade.
- B. Using the main configuration option "Single System" when installing an Add-On
- C. Using the main configuration option "Standard" when applying SAP Support Packages
- D. Using the database migration option (DMO) for SUM
Answer: B
NEW QUESTION 41
During the upgrade of your development system, you run into the adjustment of non-dictionary objects handled by transaction SPAU There you find programs that are shown in status "automatic adjustment (green traffic tight). What will happen with these programs when you continue with your upgrade without performing any other actions inside your SAP system?
- A. SUM continues with the next phase and your modifications are lost
- B. SUM continues with the next phase and your modifications are kept as In the start release
- C. SUM refuses to continue unless you have marked a transport request as modification adjustment transport
- D. Before continuing with the next phase SUM asks for a modification adjustment transport
Answer: B
NEW QUESTION 42
You are performing an SAP S/4HANA conversion with DMO as an inplace migration. How does SUM transfer the data by default from the source database to the target database during the migration?
- A. Using R3load and memory pipes
- B. Using R3load and network socket connection
- C. Using R3load and file transfer
- D. Using work processes and network socket connection
Answer: A
NEW QUESTION 43
You are performing an SAP S/4HANA conversion. You are in the BIND_PATCH phase of the Configuration roadmap step. For some software components, you find entries in the Calculated level column. What does the Calculated level indicate for those software components?
- A. The SAP support packages in the download directory that are newer than the selected support package stack
- B. The SAP support packages of the support package stack, calculated by the maintenance planner
- C. The SAP support packages contained in the upgrade media, calculated by the maintenance planner
- D. The SAP support packages that will be bound to the conversion
Answer: A
NEW QUESTION 44
You are using DMO of SUM. You defined 40 parallel R3load processes during uptime and 80 parallel R3load processes during downtime.
The server provides 8 CPU cores. Phase EU_CLONE_MIG_DT_RUN is running. In the Charts Control Center you can see 40 Process Buckets being executed in parallel.
Why are 40 Process Buckets executed in parallel?
Please choose the correct answer.
Response:
- A. The number of CPU cores does not allow more than 40 R31oad processes to be run in parallel.
- B. SUM is still running in uptime; the number of 40 defined R31oad processes is considered.
- C. These are 40 pairs of R3load processes, so there are 80 R3load processes running.
- D. There is a maximum of 40 parallel R31oad processes within this specific downtime phase.
Answer: C
NEW QUESTION 45
What do you need to know about the SAP S/4HANA Conversion Guide? Note: There are 2 correct answers to this question.
- A. It is a database-specific document.
- B. It explains the database migration option (DMO) of SUM.
- C. It explains where to find information about the custom code analysis.
- D. It contains a section about the simplification item (SI) checks.
Answer: C,D
NEW QUESTION 46
You downloaded content from the SAP note 1000009 ("ASU Toolbox 2008"). Which transaction needs to be executed to use that content in the ASU Toolbox?
Please choose the correct answer.
Response:
- A. /ASU/START (Start ASU Toolbox)
- B. /ASU/SHOW_NOTE (Show SAP Note via Web-Browser)
- C. /ASU/SSM (ASU Simple Schedule Manager)
- D. /ASU/UPGRADE (Start ASU Toolbox in Upgrade Mode)
Answer: A
NEW QUESTION 47
During a DMO procedure with SUM, after which phase is the repository first available on the target database?
Please choose the correct answer.
Response:
- A. Downtime migration (EU_CLONE_MIG_DT_RUN)
- B. Uptime migration (EU_CLONE_MIG_UT_RUN)
- C. ParaUel distribution (PARDIST_SHD)
- D. Shadow repository creation (EU_IMPORT*)
Answer: B
NEW QUESTION 48
You are performing an SAP S/4HANA conversion. Which phases are executed during SUM technical downtime? Note: There are 2 correct answers to this question
- A. TABIMJJPG
- B. PARMVNT_UPG
- C. PARDIST_SHD
- D. TABIM_SHADOW_*
Answer: A
NEW QUESTION 49
You are using the maintenance planner to calculate the required software components for your SAP S4HANA conversion. What do you need to know regarding SUM?
- A. As soon as the next SP level of SUM is available, the current version of SUM passes into "patch on request mode" immediately.
- B. AA
Answer: A
NEW QUESTION 50
You are performing an S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of dictionary objects (SPDD)?
Please choose the correct answer.
Response:
- A. Credentials of a named user in client 000 of the shadow system
- B. Credentials of user DDIC in client 000 of the shadow system
- C. Credentials of user DDIC in the development client of the development system
- D. Credentials of a named user in the development client of the development system
Answer: A
NEW QUESTION 51
You performed a custom code check for an SAP S/4HANA conversion. In which transactions can you review the results?
There are 2 correct answers to this question.
Response:
- A. ATC (ABAP Test Cockpit)
- B. SYCM (Simplification Database Content)
- C. SE80 (Object Navigator)
- D. SAT (Runtime Analysis)
Answer: A,C
NEW QUESTION 52
You are executing a standard SUM procedure to update an SAP system using main configuration mode "Standard". When will the shadow system be stopped for the last time?
Please choose the correct answer.
Response:
- A. Before the downtime starts
- B. Early in the downtime
- C. At the end of the downtime
- D. As part of the cleanup process
Answer: A
NEW QUESTION 53
What do you do to prepare the database migration option of a SUM procedure?
There are 3 correct answers
Response:
- A. Extract the SAP HANA database installation archive
- B. Move the SAPM update archive into the download folder
- C. Move the stack.xml update file into the download folder
- D. Move the R3trans update archive into the download folder
- E. Extract the SAP HANA client installation archive
Answer: B,C,E
NEW QUESTION 54
How does SUM recognize modification adjustment transports from predecessor systems?
Please choose the correct answer.
Response:
- A. By searching for transport requests in DIR_TRANS, subdirectory "transport"
- B. By searching for transport requests named <SID>K0<number>
- C. By searching for transport requests that are assigned to the project SAP_ADJUST
- D. By searching for transport requests in the file umodauto.Ist
Answer: D
NEW QUESTION 55
You are running an SAP ECC system. For which of the following activities does SUM allow you to use the Near Zero Downtime Maintenance (NZDM) capabilities?
There are 3 correct answers to this question.
Response:
- A. Perform an SAP S/4HANA conversion including DMO.
- B. Upgrade the SAP system.
- C. Apply SAP Support Packages.
- D. Use DMO for SUM.
- E. Apply an Enhancement Package.
Answer: B,C,E
NEW QUESTION 56
Which preparational steps must be performed for an SAP S/4HANA conversion?
There are 2 correct answers to this question.
Response:
- A. Delete client 066 (Early Watch Client)
- B. Uninstall Fiori apps not released for SAP_UI 7.50
- C. Uninstall industry extensions not supported by SAP S/4HANA
- D. Install add-on SAP Gateway 7.50
Answer: A,B
NEW QUESTION 57
ICNV initialization does 3
- A. Creation of flag
- B. AA
- C. Creation of views
- D. Build index on flag column
Answer: A,C,D
NEW QUESTION 58
Which additional configuration options are offered by SUM when selecting "Switch expert mode on" in main configuration option "Standard"?
There are 2 correct answers to this question.
Response:
- A. Reuse a profile for the shadow instance from a previous run.
- B. Use the Near Zero Downtime Maintenance Technology (NZDM).
- C. Choose the instance number of the shadow instance.
- D. Keep archiving on during the whole procedure.
Answer: A,C
NEW QUESTION 59
......
Passing Key To Getting E_S4HCON2022 Certified Exam Engine PDF: https://www.dumpsking.com/E_S4HCON2022-testking-dumps.html
Get Top-Rated SAP E_S4HCON2022 Exam Dumps Now: https://drive.google.com/open?id=122yhmiJqPX5BXOHouv4OLW3l5_7dcA99
