2024 Updated Cisco 350-401 Dumps PDF - Want To Pass 350-401 Fast
350-401 Practice Exam Dumps - 99% Marks In Cisco Exam
Benefits of obtaining 350-401 Certification:
Implementing Cisco IP Service Provider Networks (IPSPN) Cisco 350-401 Exam PDF will help you in many ways. Cisco 350-401 Dumps are designed to not only prepare you for the test but to help you land a job as an expert. You can work as both the network engineer and the programmer. Cisco Test Engine is used by Cisco 350-401 Certification Engineers to learn new technologies. Majority of the customer of this certification Frequently asks for detailed operating and advantages of obtaining 350-401 Certification. You will be glad to know that answer of your questions are as follows.
Shows an understanding of networking concepts and integration with other Cisco technologies. Verify a candidate's knowledge of managing Cisco routers and switches.
Analyze and troubleshoot network issues and implement solutions
Understanding of Cisco hardware and software products to configure and manage networks and devices using Cisco IOS-based router, switch, wireless IP router, firewall, IP phones, etc.
Prepare to meet the networking requirements in the evolving markets such as wireless communications, security, video surveillance, etc.
Support the information security policies and technology requirements to enable secure networks
Acquire or enhance knowledge of networking concepts, hardware, or software for skills development
Develop the skills to manage, configure and analyze networking technologies in support of business operations through configuration, integration, and troubleshooting. Drag and Drop- IMINS Cisco 350-401 Exam PDF. Spot easily implements the Cisco IOS-based hardware within the network, supporting the existing infrastructure components.
NEW QUESTION # 509
Refer to the exhibit.
Which statement about the OPSF debug output is true?
- A. The output displays all OSPF messages which router R1 has sent to received on interface Fa0/1.
- B. The output displays OSPF hello and LSACK messages which router R1 has sent or received.
- C. The output displays all OSPF messages which router R1 has sent or received on all interfaces.
- D. The output displays OSPF hello messages which router R1 has sent received on interface Fa0/1.
Answer: D
Explanation:
This combination of commands is known as "Conditional debug" and will filter the debug output
based on your conditions. Each condition added, will behave like an 'And' operator in Boolean
logic. Some examples of the "debug ip ospf hello" are shown below:
NEW QUESTION # 510
Which method creates an EEM applet policy that is registered with EEM and runs on demand or manually?
- A. event manager applet ondemand
event register
action 1.0 syslog priority critical msg 'This is a message from ondemand' - B. event manager applet ondemand
event manual
action 1.0 syslog priority critical msg 'This is a message from ondemand' - C. event manager applet ondemand
event none
action 1.0 syslog priority critical msg 'This is a message from ondemand' - D. event manager applet ondemand
action 1.0 syslog priority critical msg 'This is a message from ondemand'
Answer: C
Explanation:
Explanation
An EEM policy is an entity that defines an event and the actions to be taken when that event occurs.
There are two types of EEM policies: an applet or a script.
An applet is a simple form of policy that is defined within the CLI configuration. answer 'event manager applet ondemand event register action 1.0 syslog priority critical msg 'This is a message from ondemand'
<="" p="" style="box-sizing: border-box;">
There are two ways to manually run an EEM policy.
EEM usually schedules and runs policies on the basis of an event specification that is contained within the policy itself.
The event none command allows EEM to identify an EEM policy that can be manually triggered.
To run the policy, use either the action policy command in applet configuration mode or the event manager run command in privileged EXEC mode.
NEW QUESTION # 511
An engineer uses the Design workflow to create a new network infrastructure in Cisco DNA Center. How is the physical network device hierarchy structured?
- A. by location
- B. by organization
- C. by hostname naming convention
- D. by role
Answer: A
Explanation:
Explanation
You can create a network hierarchy that represents your network's geographical locations. Your network hierarchy can contain sites, which in turn contain buildings and areas. You can create site and building IDs to easily identify where to apply design settings or configurations later.
Reference:
https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-c
NEW QUESTION # 512
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.
Answer:
Explanation:
NEW QUESTION # 513
Drag and drop the descriptions from the left onto the QoS components on the right.
Answer:
Explanation:
Explanation:
NEW QUESTION # 514
Running the script causes the output in the exhibit.
Which change to the first line of the script resolves the error?
- A. from ncclient import manager
- B. import manager
- C. from ncclient import*
- D. ncclient manager import
Answer: A
Explanation:
https://github.com/ncclient/ncclient
NEW QUESTION # 515
An engineer must configure a multicast UDP jitter operation. Which configuration should be applied?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 516
Refer to the exhibit. An engineer is configuring an EtherChannel between Switch1 and Switch2 and notices the console message on switch2. Based on the output, which action resolves this issue?
- A. Configure more member ports on Switch1.
- B. Configure the same EtherChannel protocol on both switches
- C. Configure less member ports on Switch2.
- D. Configure the same port channel interface number on both switches
Answer: B
Explanation:
Reference:
In this case, we are using your EtherChannel without a negotiation protocol on Switch2. As a result, if the opposite switch is not also configured for EtherChannel operation on the respective ports, there is a danger of a switching loop. The EtherChannel Misconfiguration Guard tries to prevent that loop from occuring by disabling all the ports bundled in the EtherChannel.
NEW QUESTION # 517
Drag and drop the LISP components from the left onto the function they perform on the right. Not all options are used.
Answer:
Explanation:
Explanation
+ accepts LISP encapsulated map requests: LISP map resolver
+ learns of EID prefix mapping entries from an ETR: LISP map server
+ receives traffic from LISP sites and sends it to non-LISP sites: LISP proxy ETR
+ receives packets from site-facing interfaces: LISP ITR
Explanation
ITR is the function that maps the destination EID to a destination RLOC and then encapsulates the original packet with an additional header that has the source IP address of the ITR RLOC and the destination IP address of the RLOC of an Egress Tunnel Router (ETR).
After the encapsulation, the original packet become a LISP packet.
ETR is the function that receives LISP encapsulated packets, decapsulates them and forwards to its local EIDs. This function also requires EID-to-RLOC mappings so we need to point out an "map-server" IP address and the key (password) for authentication.
A LISP proxy ETR (PETR) implements ETR functions on behalf of non-LISP sites. A PETR is typically used when a LISP site needs to send traffic to non-LISP sites but the LISP site is connected through a service provider that does not accept no routable EIDs as packet sources. PETRs act just like ETRs but for EIDs that send traffic to destinations at non-LISP sites.
Map Server (MS) processes the registration of authentication keys and EID-to-RLOC mappings. ETRs sends periodic Map-Register messages to all its configured Map Servers.
Map Resolver (MR): a LISP component which accepts LISP Encapsulated Map Requests, typically from an ITR, quickly determines whether or not the destination IP address is part of the EID namespace
NEW QUESTION # 518
Refer to the exhibit.
Which IP address becomes the active next hop for 192.168.102 0/24 when 192.168.101.2 fails?
- A. 192.168.101.6
- B. 192.168.101.18
- C. 192.168.101.14
- D. 192.168.101.10
Answer: B
Explanation:
The '>' shown in the output above indicates that the path with a next hop of 192.168.101.2 is the current best path.
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External > IGP Cost > eBGP Peering > Router ID BGP prefers the path with highest weight but the weights here are all 0 (which indicate all routes that are not originated by the local router) so we need to check the Local Preference. Answer
'192.168.101.18' path without LOCAL_PREF (LocPrf column) means it has the default value of 100.
Therefore we can find the two next best paths with the next hop of 192.168.101.18 and
192.168.101.10.
We have to move to the next path selection attribute: Originate. BGP prefers the path that the local router originated (which is indicated with the "next hop 0.0.0.0"). But none of the two best paths is self-originated.
The AS Path of the next hop 192.168.101.18 is shorter than the AS Path of the next hop
192.168.101.10 then the next hop 192.168.101.18 will be chosen as the next best path.
NEW QUESTION # 519
Relet lo Ibe exhibit.
An ertgineer must modify the existing configuration so that R2 can take over as the primary router when serial interface 0/0.1 on R1 goes down. Whtch command must the engineer apply''
- A. R2# standby 100 priority 100
- B. R2W standby 100 track 26 decrement 10
- C. R2# standby 100 preempt
- D. R2# track 26 interface SerialWO.1 line-protocol
Answer: B
NEW QUESTION # 520
Which Python snippet should be used to store the devices data structure in a JSON file?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
The correct Python snippet to store the devices data structure in a JSON file is option C. This option uses the json.dump() method, which serializes devices (the data structure) into a JSON formatted stream to OutFile (which is the opened file for writing). The 'w' argument in open() function stands for write mode, which allows you to write to the file.
NEW QUESTION # 521
Reter to the exhibit.
A client requests a new SSID that will use web-based authentication and external RADIUS servers. Which Layer 2 security mode must be selected?
- A. WPA2 + WPA3
- B. WPA + WPA2
- C. Static WEP
- D. None
Answer: B
NEW QUESTION # 522
Which outcome is achieved with this Python code?
- A. connects to a Cisco device using SSH and exports the BGP table for the prefix
- B. displays the output of the show command in a formatted way
- C. connects to a Cisco device using Telnet and exports the routing table information
- D. connects to a Cisco device using SSH and exports the routing table information
Answer: A
NEW QUESTION # 523 
Refer to the exhibit. An engineer attempts to configure standby group 512 on interface GigabitEthernet0/1, but the configuration is not accepted. Which command resolves this problem?
- A. standby 512 preempt
- B. standby 512 priority 100
- C. standby redirects
- D. standby version 2
Answer: D
Explanation:
The issue is that the configuration for the HSRP (Hot Standby Router Protocol) group 512 on interface GigabitEthernet0/1 is not being accepted. This could be due to the use of a group number higher than the maximum allowed in the default HSRP version. By using the "standby version 2" command, it enables HSRP version 2, which supports group numbers from 0 to 4095, resolving this issue. References: Implementing and Operating Cisco Service Provider Network Core Technologies
NEW QUESTION # 524
......
Cisco 350-401 Exam focuses on the core technologies and concepts that are essential for designing, implementing, and operating enterprise network infrastructures. It covers a wide range of topics, such as network architecture, virtualization, infrastructure, security, automation, and network assurance. 350-401 exam is designed to assess the candidate's ability to work with complex network solutions and troubleshoot network issues effectively.
The Cisco 350-401 exam covers a wide range of topics, including network infrastructure, wireless networking, security, automation, and network assurance. It is a comprehensive exam that tests the candidate's knowledge of the latest Cisco technologies and best practices. Passing 350-401 exam demonstrates that the candidate has a solid foundation in enterprise-level networking and can effectively implement and manage complex networks. The Cisco 350-401 certification is widely recognized in the industry and is a valuable asset for IT professionals looking to advance their careers in networking.
Updated Verified 350-401 Q&As - Pass Guarantee: https://www.dumpsking.com/350-401-testking-dumps.html
350-401 Certification with Actual Questions: https://drive.google.com/open?id=11uX4xw2E7jTVxV25raqwr18sr1DwjoBy
