2024 100% Free 500-470 Daily Practice Exam With 38 Questions [Q19-Q38]

2024 100% Free 500-470 Daily Practice Exam With 38 Questions

500-470 exam torrent Cisco study guide

Cisco 500-470 exam is designed to test the candidate's knowledge of SDA, SDWAN, and ISE technologies, as well as their ability to design and implement these technologies in a Cisco enterprise network. 500-470 exam covers a range of topics, including network design principles, security, automation, and orchestration. It also covers the latest Cisco products and solutions, including the Cisco DNA Center, Cisco ISE, and Cisco SDWAN.

 

NEW QUESTION # 19
Where does the Cisco V-Edge Router perform QOS traffic classification?

• A. Per vEdge
• B. Per VPN
• C. Egress interface
• D. Ingress interface

Answer: D

Explanation:
Explanation
The Cisco V-Edge Router performs QoS traffic classification on the ingress interface, before the traffic enters the VPN. The classification is based on the match criteria specified in the access lists, which can include the source and destination IP addresses, ports, protocols, DSCP values, and application-aware NBAR attributes.
The classification results in assigning a forwarding class and a QoS group to each packet. The forwarding class determines the output queue and the scheduling policy for the packet on the egress interface. The QoS group is an internal label that can be used to remark the DSCP value of the packet or to match the packet in another access list for further processing. References:
Forwarding and QoS Configuration Guide for vEdge Routers, Cisco SD-WAN Release 20, Chapter 2:
Configuring Localized Data Policy,
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/qos/vEdge-20-x/qos-book/localized-da Cisco SD-WAN Design Guide, Release 20, Chapter 6: Quality of Service,
https://www.cisco.com/c/en/us/td/docs/solutions/CVD/SDWAN/2020/b_SD-WAN_Design_Guide_Aug_2

NEW QUESTION # 20
Which Cisco SD WAN component provides a secure data plane with remote vEdge routers?

• A. vSmart
• B. vManage
• C. vBond
• D. vEdge

Answer: D

NEW QUESTION # 21
Which are three functions used by ISE automation BYOD flow? (Choose three.)

• A. BioMetrics
• B. Certificate Enrollment
• C. Supplicant Provisioning
• D. Active Directory Group Membership
• E. LDAP Multi Tenant Provisioning
• F. Device Registration

Answer: B,C,F

NEW QUESTION # 22
Whatis a challenge of having an SD-Access Centralized design where a single fabric encompasses the main site and all branch sites across the WAN?

• A. End to End Routing is not supported
• B. DNA Center does not support it.
• C. Since the traffic is encapsulated, SD-WAN features can't be used to optimize/route traffic.
• D. SSIDs would be the same across all sites

Answer: C

NEW QUESTION # 23
What is the default interval for BFD packets?

• A. 15 seconds
• B. 10 seconds
• C. 5 seconds
• D. 1 second

Answer: D

NEW QUESTION # 24
Which two are benefits from a WAN design? (Choose two.)

• A. Provide lower quality service to guest users
• B. Reduce cost and increase operational complexity
• C. Prioritize and secure with granular control
• D. Ensure remote site uptime
• E. Lower circuit bandwidth requirements

Answer: C,D

Explanation:
Explanation
A WAN design is a plan for how to connect multiple sites or locations over a wide area network (WAN). A WAN design can have various benefits, depending on the goals and requirements of the organization. Two of the possible benefits from a WAN design are:
Ensure remote site uptime: A WAN design can help to ensure that remote sites or branches have reliable and consistent connectivity to the central site or the cloud. This can improve the availability and performance of critical applications and services, such as voice, video, collaboration, and data backup. A WAN design can also provide redundancy and resiliency in case of network failures or disasters, by using multiple WAN links, backup routes, or failover mechanisms. For example, SD-WAN is a WAN design that uses software to dynamically route traffic over the best available WAN link, based on the network conditions and the application requirements1.
Prioritize and secure with granular control: A WAN design can also help to prioritize and secure the traffic and applications that flow over the WAN. This can enhance the quality of service (QoS) and the security of the network. A WAN design can use various techniques, such as traffic shaping, policy-based routing, encryption, firewall, or VPN, to classify, prioritize, and secure the WAN traffic according to the business needs and the security policies. For example, TrustSec is a WAN design that uses software-defined segmentation to enforce granular access policies based on the identity and context of users, devices, and applications2.
The other options, provide lower quality service to guest users, reduce cost and increase operational complexity, and lower circuit bandwidth requirements, are not benefits from a WAN design. Providing lower quality service to guest users is not a desirable outcome, as it can affect the user experience and the reputation of the organization. Reducing cost and increasing operational complexity is a trade-off that may not be worth it, as it can create more challenges and risks for the network management and maintenance. Lowering circuit bandwidth requirements is not a benefit in itself, but a means to achieve other benefits, such as reducing cost or improving performance. A WAN design should aim to optimize the bandwidth utilization and allocation, rather than simply lowering it. References := : 1: Cisco SD-WAN Solution Design Guide (CVD) - Cisco1, 2:
Cisco TrustSec Solution Overview - Cisco

NEW QUESTION # 25
What two best describe self-healing functionality on vEdges? (Choose two.)

• A. vManage detect routing outage detection to detect reachability outages and understand their scope and likely root cause
• B. With configuration change, rolling back the configuration change when loss of connectivity to vManage
• C. Software reconfiguration capability allowing for dynamic reconfiguration of existing channels
• D. In software upgrade process, rolling back to the previously running software image when connectivity to vManage fails

Answer: B,D

NEW QUESTION # 26
Which three statements best describe Cisco ISE configuration capabilities? (Choose three.)

• A. ISE Deployment Assistant (IDA) is a built in application designed to accelerate the deployment of Cisco Identity Service Engine (ISE)
• B. ISE wizards and pre-canned configurations ease ISE roll-out significantly.
• C. ISE requires an understanding of the command line for set-up and configuration.
• D. Cisco Active Advisor provides additional guidance for ISE deployments
• E. Cisco ISE includes wireless setup wizard and visibility wizard.

Answer: A,D,E

NEW QUESTION # 27
How does identity management solve two customer problems? (Choose two.)

• A. Provides network visibility and security
• B. Enables and enforces 802.1X across the network platform
• C. Increases digitization
• D. Achieves dynamic and adaptive network segmentation
• E. Manages group membership

Answer: A,D

Explanation:
Explanation
Identity management is the practice of making sure that people and entities with digital identities have the right level of access to enterprise resources like networks and databases. User roles and access privileges are defined and managed through an identity management system, such as Cisco Identity Services Engine (ISE)1.
Identity management solves two customer problems:
Provides network visibility and security: Identity management allows customers to see who and what is on their network, and to control their access based on policies and context. Identity management also integrates with other security solutions, such as Cisco Firepower, Cisco Stealthwatch, or Cisco Umbrella, to detect and respond to threats, and to enforce adaptive network access policies based on the threat level of the endpoints2.
Achieves dynamic and adaptive network segmentation: Identity management enables customers to segment their network based on the identity and context of the users and devices, rather than the IP addresses and VLANs. This allows customers to implement a zero-trust model, where only trusted users and devices can access the resources they need, and where the access policies can be dynamically updated based on the changing conditions and requirements. Identity management also supports Cisco TrustSec, which is a technology that assigns scalable group tags (SGTs) to endpoints and enforces group-based policies (contracts) across the network3.
References:
1: [What Is Identity Access Management (IAM)? - Cisco

NEW QUESTION # 28
Which three statements best describe Cisco ISE configuration capabilities? (Choose three.)

• A. ISE wizards and per-canned configurations ease ISE roll-out significantly.
• B. ISE Deployment Assistant (IDA) is a built in application designed to accelerate the deployment of Cisco Identity Service Engine (ISE)
• C. ISE requires an understanding of the command line for set-up and configuration.
• D. Cisco Active Advisor provides additional guidance for ISE deployments.
• E. Cisco ISE includes wireless setup wizard and visibility wizard.

Answer: A,B,E

Explanation:
Explanation
Cisco ISE configuration capabilities include the following features:
ISE Deployment Assistant (IDA) is a built-in application designed to accelerate the deployment of Cisco Identity Service Engine (ISE). IDA guides the user through the initial setup, configuration, and verification of ISE with a step-by-step wizard. IDA also provides best practices and recommendations for common deployment scenarios, such as wireless, wired, VPN, guest, and BYOD1.
Cisco ISE includes wireless setup wizard and visibility wizard. The wireless setup wizard simplifies the configuration of ISE for wireless access by automating the tasks of adding network devices, creating authorization profiles, and applying policies. The visibility wizard helps the user to enable device profiling and posture services, and to view the endpoint information and compliance status on the ISE dashboard2.
ISE wizards and per-canned configurations ease ISE roll-out significantly. ISE wizards are interactive tools that assist the user in configuring various features and functions of ISE, such as certificates, network access devices, authentication and authorization policies, guest access, BYOD, and TrustSec.
Per-canned configurations are predefined templates that provide common settings and values for ISE components, such as policy sets, authorization profiles, and network conditions. The user can apply these templates to quickly configure ISE for specific use cases, such as 802.1X, MAB, or web authentication3.
The other options, Cisco Active Advisor and ISE command line, are not accurate descriptions of ISE configuration capabilities. Cisco Active Advisor is a separate cloud-based service that provides network health and security checks, device lifecycle management, and best practice recommendations for Cisco devices. It is not directly related to ISE deployments. ISE command line is an interface that allows the user to perform administrative tasks, such as backup and restore, password recovery, and troubleshooting. However, ISE does not require an understanding of the command line for set-up and configuration, as most of the functions can be done through the graphical user interface (GUI). References := : 1: ISE Deployment Assistant (IDA) - Cisco Identity Services Engine - Cisco, 2: Cisco Identity Services Engine Administrator Guide, Release 2.7 - Wireless Setup Wizard [Cisco Identity Services Engine] - Cisco, 3: Cisco Identity Services Engine Administrator Guide, Release 2.7 - ISE Wizards [Cisco Identity Services Engine] - Cisco, : Cisco Active Advisor - Cisco, : Cisco Identity Services Engine CLI Reference Guide, Release 2.7 - Using the Command-Line Interface [Cisco Identity Services Engine] - Cisco

NEW QUESTION # 29
Which three services must be enabled under the ISE Admin settings to successfully integrateISE, when integrating ISE with DNA-C? (Choose three.)

• A. Infoblox
• B. SXP services
• C. Threat-Centric NAC
• D. ServiceNow
• E. Passive Identity Service
• F. PxGrid

Answer: A,B,D

Explanation:
Explanation
Cisco ISE configuration capabilities include the following features:
ISE Deployment Assistant (IDA): This is a built-in application designed to accelerate the deployment of Cisco Identity Service Engine (ISE) by providing a guided workflow for configuring the most common ISE use cases, such as guest access, BYOD, and secure wired and wireless access1. IDA also provides validation checks, best practices, and troubleshooting tips to ensure a successful deployment.
Wireless Setup Wizard and Visibility Wizard: These are two of the several wizards that Cisco ISE provides to simplify the configuration of various ISE functions and features. The Wireless Setup Wizard helps to configure the wireless network settings, such as SSIDs, authentication methods, and policies, for secure wireless access2. The Visibility Wizard helps to enable the ISE profiling service, which collects and analyzes endpoint data to identify, classify, and monitor devices on the network3.
ISE Wizards and Pre-Canned Configurations: These are the tools that ease the ISE roll-out significantly by providing ready-made templates, policies, and settings for common ISE scenarios, such as posture assessment, device administration, and threat-centric NAC. These tools help to reduce the manual configuration efforts and errors, and speed up the time to value.
References:
1: [Cisco Identity Services Engine Administrator Guide, Release 3.3 - ISE Deployment Assistant [Cisco Identity Services Engine]] : 2: [Cisco Identity Services Engine Administrator Guide, Release 3.3 - Wireless Setup Wizard [Cisco Identity Services Engine]] : 3: [Cisco Identity Services Engine Administrator Guide, Release 3.3 - Visibility Wizard [Cisco Identity Services Engine]] : : [Cisco Identity Services Engine Administrator Guide, Release 3.3 - ISE Wizards and Pre-Canned Configurations [Cisco Identity Services Engine]]

NEW QUESTION # 30
Which are three Cisco ISE use cases? (Choose three.)

• A. Monitoring
• B. Security Incident and Event Management
• C. BYOD
• D. Segmentation
• E. Access Control
• F. Assurance

Answer: C,D,E

NEW QUESTION # 31
What is the default interval for BFD packets?

• A. 10 Seconds
• B. 5 Seconds
• C. 1 Seconds
• D. 15 Seconds

Answer: C

Explanation:
Explanation
https://www.cisco.com/en/US/technologies/tk648/tk365/tk207/technologies_white_paper0900 aecd80243fe7.html The default interval for BFD packets is 1 second. BFD uses Hello packets to detect the liveness and faults on a connection. BFD Hello Interval packet is sent at the default interval of 1000 milliseconds on all connections1. This command can be used to change the hello interval for a transport color. The interval for transmitting and receiving BFD packets can also be configured on the interface level or the BFD session level, depending on the device and the protocol234. The BFD detection time is calculated as the product of the local detection multiplier and the agreed remote transmission interval. The lower the BFD detection time, the faster the BFD session can detect a fault. However, a lower BFD detection time also consumes more system resources and bandwidth. Therefore, the BFD detection time should be configured according to the network situation and performance requirements. References:
1: Bidirectional Forwarding Detection - Cisco
2: Configuring the BFD Detection Time - CloudEngine 16800 ... - Huawei
3: Cisco IOS XE Catalyst SD-WAN Qualified Command Reference
4: bfd min-echo-receive-interval - Aruba

NEW QUESTION # 32
How many vEdge router security zones (VPN's) can be configured?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: B

Explanation:
Explanation/Reference:
Reference: https://sdwan-docs.cisco.com/Product_Documentation/Software_Features/ Release_18.1/04Segmentation/02Configuring_Segmentation_(VPNs)

NEW QUESTION # 33
Which Cisco SD WAN component provides a secure data plane with remote vEdge routers?

• A. vSmart
• B. vManage
• C. vEdge
• D. vBond

Answer: A

Explanation:
Explanation/Reference:
Reference : https://sdwan-docs.cisco.com/Product_Documentation/Software_Features/ Release_18.1/05Security/01Security_Overview/Data_Plane_Security_Overview

NEW QUESTION # 34
Which is a key function of a Digital Network?

• A. Centralized provisioning
• B. Software upgrades
• C. Provides secure data plane with remote vEdge routers
• D. Nat traversal

Answer: A

Explanation:
Explanation
A Digital Network is a network that is based on the Cisco Digital Network Architecture (Cisco DNA), which is an open and extensible, software-driven network architecture designed to rapidly deliver services that enable IT to innovate faster, reduce costs and complexity, lower risk, and comply with regulatory requirements1. A key function of a Digital Network is centralized provisioning, which allows IT to automate the deployment and configuration of network devices and services using a single platform, such as the Cisco DNA Center2.
Centralized provisioning simplifies network management, reduces human errors, and accelerates network changes.
References:
2: [Cisco DNA Software - Digital Network Architecture - Cisco] : 1: [Cisco Digital Network Architecture]

NEW QUESTION # 35
Which three wireless product families are supported in the current DNA-C 1.1 release? (Choose three.)

• A. WLC 5508
• B. WLC 3504
• C. AP 3800
• D. AP 1260
• E. WLC 8540

Answer: B,C,E

Explanation:
Explanation
According to the Cisco DNA Center Compatibility Matrix1, the current DNA-C 1.1 release supports the following wireless product families:
WLC 8540: This is a high-performance wireless controller that can support up to 6000 access points and
64,000 clients. It is designed for large-scale wireless deployments and offers advanced features such as application visibility and control, flexible radio assignment, and software-defined access2.
AP 3800: This is a high-performance access point that can support up to 5.2 Gbps data rates and 4x4 MIMO with four spatial streams. It is designed for high-density environments and offers features such as flexible radio assignment, CleanAir, ClientLink, and Smart Antenna Connector3.
WLC 3504: This is a compact wireless controller that can support up to 150 access points and 3000 clients. It is designed for small to medium-sized wireless deployments and offers features such as application visibility and control, software-defined access, and TrustSec4.
The other wireless product families, such as AP 1260 and WLC 5508, are not supported in the current DNA-C
1.1 release.
References:
1: Cisco DNA Center Compatibility Matrix
2: Cisco 8540 Wireless Controller Data Sheet - Cisco
3: Cisco Aironet 3800 Series Access Points Data Sheet - Cisco
4: Cisco 3504 Wireless Controller Data Sheet - Cisco

NEW QUESTION # 36
Which three options describe fabric overlay concepts? (Choose three.)

• A. An Overlay is a logical topology
• B. A virtual Local Area Network
• C. GRE is a type of Overlay
• D. A link state routing protocol like OSPF
• E. Intermediate System to Intermediate System
• F. An Overlay uses alternate forwarding attributes

Answer: A,C,F

NEW QUESTION # 37
Which two platforms can host a vEdge Cloud Router? (Choose two.)

• A. AWS
• B. Dreamhost
• C. DigitalCloud
• D. Google
• E. Microsoft Azure

Answer: A,E

NEW QUESTION # 38
......

Identity Services Engine (ISE) is a network security solution that provides access control and policy management. ISE integrates with other network services to provide a comprehensive security solution. 500-470 exam covers topics such as configuring and troubleshooting ISE, implementing network access policies, and integrating ISE with other network services.

 

Use Valid New 500-470 Test Notes & 500-470 Valid Exam Guide: https://www.dumpsking.com/500-470-testking-dumps.html

500-470 Actual Questions Answers PDF 100% Cover Real Exam Questions: https://drive.google.com/open?id=1UYyWfUw1U4tt1r_GegnUhumo_CsffFhJ